Rifle Scopes Ring/mount selection help needed

[cumminscowboy01]

Hey fellas, I purchased a nightforce atacr from a member here on snipers hide. I’m trying to figure out what type of rings or mount I should purchase for the 34mm tube of the atacr. There is tons of information on scopes out there but mounting systems are a little more hit or miss. I don’t want anything cheap but I also don’t need a $250 mount setup. Anyone have suggestions on something that would be solid and reliable in the $100 range or less?

 

[dirthead1]

What are you mounting it on?

 

[cumminscowboy01]

What are you mounting it on?

sorry I should have mentioned that. It’s going on a scar 20s

 

[dirthead1]

Personally, I would buy something like this...... https://www.eurooptic.com/34-mm-1-piece-mount-Ultra-high-150-20-MOA-306-98.aspx

You have a $4000 rifle and $2500 scope. Use a good mount and you won't regret it. I don't know of any that are under $100 (maybe someone else does though). Also, watch the PX as mounts pop up all the time.

 

[BufordTJustice]

Don't go cheap on the mount, you'll regret it.

 

[TheBoctor]

Hey fellas, I purchased a nightforce atacr from a member here on snipers hide. I’m trying to figure out what type of rings or mount I should purchase for the 34mm tube of the atacr. There is tons of information on scopes out there but mounting systems are a little more hit or miss. I don’t want anything cheap but I also don’t need a $250 mount setup. Anyone have suggestions on something that would be solid and reliable in the $100 range or less?

I hate to tell ya but on a SCAR you really do need a high dollar mount setup. That's a gigantic piece of steel slamming back and forth in there and it WILL work pretty much everything loose over time and flat out break stuff that's not up to snuff. Most stuff will survive a normal rifle because the recoil only goes in one direction. On a SCAR, it goes backwards then immediately turns around and slams forwards.

I've had good luck with an ADM QR mount on my 17S. https://www.americandefensemanufacturing.com/product-p/ad-delta-legacy.htm

 

[cumminscowboy01]

Thanks for the input yall. I guess I’ll pony up a little more cash for a better mount. The wife is going to kill me if this scar project gets much more expensive