not a bolt gun but close? don't know where else to ask. looking for an action screw torque range. the diagonal screw is prob the mail thing? couldn't find it anywhere. specs for 77 are around. might start with those #s if no specific #s on a # 1. i know there are a bunch of accuracy tweaks around. want to start with just the (used) gun as i got it and scoped and see.
-
Having trouble using the site?
Contact support
ruger # 1 torque
- Thread starter mosin46
- Start date
Are you referring to the "forearm take down screw" as being the "action screw"?
Ruger doesn't give a torque spec other than this ~ "1. Be certain the forend screw is snugly tightened."
Since this screw is compressing the wood forearm against the hanger, I wouldn't put much torque here, probaby no more than 25 inch pounds and loctite it in, that is what I do with mine anyway.
Ruger doesn't give a torque spec other than this ~ "1. Be certain the forend screw is snugly tightened."
Since this screw is compressing the wood forearm against the hanger, I wouldn't put much torque here, probaby no more than 25 inch pounds and loctite it in, that is what I do with mine anyway.
thanks. my calling a forearm screw an action screw was wrong. i figure to start about 25 on both if no specific. as you,found no ruger #s on a search. not good factory practice. will see if it shoots. 1 in 12-a big gamble for me-so try 55s and hope. i am a heavy bullet guy.
Here is an article that goes through about all the tips that folks have done.
www.rifleshootermag.com
I have the hicks on a 1V that helped out. Had another 1V that didn't need anything done to it.
Ruger No. 1 Single-Shot Rifle: Tips to Improve Its Accuracy - RifleShooter
Here are some tips and tricks to get the very best accuracy out of Ruger's gorgeous single-shot rifle.
www.rifleshootermag.com
I have the hicks on a 1V that helped out. Had another 1V that didn't need anything done to it.
