Rugged Suppressor accuracy issue

jcmartinezlorenzo

Private
Minuteman
Oct 9, 2024
3
0
Florida
Hi y'all, I got a Razor 762 suppressor for one my PRS rifles and I'm having some accuracy issues. I have removed my hellfire brake and installed the can and both of my rifles shoot 0.7 MOA, install the brake and goes to 0.3 MOA. this is both 6 dasher and 6.5 creedmoor, both handload. I have sent the can for an accuracy check with Rugged and no issues fown on their side. Anyone having this issues? Any advice?

Thanks in advance
 
The harmonics of the barrel are going to be affected by adding the can vs the brake. The can will generally increase your velocity to some degree as well. If your concern is shooting the smallest possible groups with the can on, you should do your load development with that variable in place.

Its also possible that you're just shooting slightly worse with the silencer attached.
 
The harmonics of the barrel are going to be affected by adding the can vs the brake. The can will generally increase your velocity to some degree as well. If your concern is shooting the smallest possible groups with the can on, you should do your load development with that variable in place.

Its also possible that you're just shooting slightly worse with the silencer attached.
Thanks for the feedback. I did load based on the can but it didn’t work. The groups were all over the place, it seemed inconsistent. I’m concerned that could be the can. I don’t know many PRS shooters using Rugged tho.
 
I have an AR10 6.5CM that refuses to shoot with a can for whatever reason, three different cans that I have tried. Shoots great without one but not so good with. I have tried independent load development but there is just some harmonic that it does not like. 24" Proof barrel.