SAKO S20 rail help

[BillyD]

I was wondering how to get 20 MOA elevation on this system? It’s a two piece rail that does not seem to accommodate a Spuhr type mount.
I’m not sure how to go about this. I appreciate any advice/direction y’all can provide.

I’ll be mounting a NF ATACR 5-25x56 with 34mm tube.

 

[madangler1]

Call Sako. I think you have to buy one of their mounts.

S20 Accessories

www.sako.fi

 

[Trigger Monkey]

Burris XTR Signature rings will get the job done, you can add up to 40 MOA.

XTR Signature Rings™ | Burris Optics

www.burrisoptics.com

 

[SilverSled]

The contessa Pictatinny rail is made for the Sakos, comes in 0, 20 and 40moa I believe

Picatinny Rails | Beretta Australia

All Contessa Picatinny Rails are precision made by Contessa Alessandro & C. s.n.c. in Italy. They are made with exact hole spacing, and attach to your rifle using the supplied screws and wrench. Rails are available in 0, 10, 20 and 30 MOA, giving you more options for long range shooting.

www.berettaaustralia.com.au

 

[BillyD]

Burris XTR Signature rings will get the job done, you can add up to 40 MOA.

XTR Signature Rings™ | Burris Optics

www.burrisoptics.com

That’s what I need!

 

[BillyD]

The contessa Pictatinny rail is made for the Sakos, comes in 0, 20 and 40moa I believe

Picatinny Rails | Beretta Australia

All Contessa Picatinny Rails are precision made by Contessa Alessandro & C. s.n.c. in Italy. They are made with exact hole spacing, and attach to your rifle using the supplied screws and wrench. Rails are available in 0, 10, 20 and 30 MOA, giving you more options for long range shooting.

www.berettaaustralia.com.au

It doesn’t fit the S20. This one has picatinny

 

[BillyD]

The rail is two piece

 

[Trigger Monkey]

That’s what I need!

I've used them a couple times, a little tedious to get set up but it's really not that bad and they definitely work. I'm currently using a set on a 10/22 to get it out to 400.

 

[SilverSled]

It doesn’t fit the S20. This one has picatinny

Apologies, you’re right. I didn’t look at the image properly

 

[BillyD]

Apologies, you’re right. I didn’t look at the image properly

No problem, I wish it were one solid piece. Would of made my life a lot easier to just mount a Spuhr. Haha

 

[madangler1]

I think they offer something just for the S20. May not be stateside yet. I would email Sako Finland; bypass the US Beretta CS (they never answer the darn phone).

I was on the fence about buying a S20. This is one of the reasons why. It's a hunting gun and a < 600 yard gun if you don't need an elevated rail. Technically though, it's perfect for my needs. Most of the guys on this board have access to > 600 yard ranges. I don't unfortunately.

 

[BillyD]

No kidding about the Beretta phones. I’ll call the Sako Finland

Thanks a bunch!

 

[Mccomasg09]

That’s what I need!

Hey did these end up working for you? I’m in the same predicament.

 

[BillyD]

Hey did these end up working for you? I’m in the same predicament.

I held off buying them because my scope is 34mm and needs 1,25 height. Their 34mm only come in 1” or 1.5”. I may just suck it up and get the tall rings

 

[ratton]

Contact Near Precision. Richard will take care of you.

 

[BillyD]

Contact Near Precision. Richard will take care of you.

Thank you

 

[BillyD]

I ended up contacting Near Precision. He has several options for the S20 (various MOA). Two day shipping from Canada to here. Very pleased. I told him what I have and what I wanted and he put it together nicely.

Field trials tomorrow.

 

[ToddM]

Awesome that NEAR is doing mounts for the S20 now, especially since the 20MOA sako mount has been vaporware here in the states. How's the S20's shooting for everyone? I've handled a couple but the stock plastic felt very cheap to me, and it creaked a lot, must be the plastic parts of the stuck rubbing at the seams.

 

[toader]

Richard Near makes some VERY NICE stuff!!!