I have an LR308 that I will be using a YHM Phantom can on. The SASS barrel has a .936 diameter at the gas block. I like the system they use on the Armalite Super SASS. Can anyone recomend an adjustable gas system that would work for this setup?
-
Having trouble using the site?
Contact support
SASS Selective Gas System
- Thread starter match308
- Start date
Re: SASS Selective Gas System
JP Enterprise.
http://www.jprifles.com/1.4.6_gs.php
I run the low profile on an AR10 with the same can (YHM Phantom), very quiet. With the adjustment screw set where I like it, the gun is not overgassed, the bolt cycles fine, the brass is relaodable (not dented to hell and fired off 20 feet from my shooting position), all is good.
I often shoot mine lefty, and without the gas block, the vented gas cleared my sinuses with every shot; now, not so much.
Be advised, your brass and gun get dirty as hell when run with a can, just be prepared. Dirty as hell!
JP Enterprise.
http://www.jprifles.com/1.4.6_gs.php
I run the low profile on an AR10 with the same can (YHM Phantom), very quiet. With the adjustment screw set where I like it, the gun is not overgassed, the bolt cycles fine, the brass is relaodable (not dented to hell and fired off 20 feet from my shooting position), all is good.
I often shoot mine lefty, and without the gas block, the vented gas cleared my sinuses with every shot; now, not so much.
Be advised, your brass and gun get dirty as hell when run with a can, just be prepared. Dirty as hell!
Re: SASS Selective Gas System
Check with Marty at Teppo Jutsu...they've got custom built ones however you want it. I dont like the JP style personally, not a fan of needing a wrench to adjust.
Teppo Jutsu (at the bottom of the page)
Check with Marty at Teppo Jutsu...they've got custom built ones however you want it. I dont like the JP style personally, not a fan of needing a wrench to adjust.
Teppo Jutsu (at the bottom of the page)
Similar threads
