Re: savage 110 fcp .338 lapua stuck cases
ya, when I first go mine. It was leaving a nipple on shoulder of case after firing it. It was b/c there was an indentation in chamber where shoulder lays. I sent back to savage all at zero expence to me. They put new barrel on, tested it out and sent back to me. Took about 7-8 weeks, even got 5 rounds of lapua brass out the deal.lol. I have had very good luck with there service/warrenty department. I do have to say they dont say much over the phone until they know you have a real problem. Im sure they get a lot of cazy people out there. One thing for sure, if you have reloaded for the gun, witch I know you have'nt
. Make sure you only have shot your factory loads and send them in with your gun after shooting them. Do not mention reloading other than you would like to after you get problem solved. Go to savagearms.com and look at there warrenty page, you will see that your gun will be fixed for sure, as long as you havn't had longer than 1 year.
I have not had a problem with my nosler brass as long as I stay under 91.5gr retumbo, and with my lapua brass I have no problems all the way to max load 94.0gr retumbo with 300gr bergers or SMK's.
I know one thing for sure, dont through that savage barrel away if you put a custom one on your self.
Thats the only reason I shoot factory loads at first to make sure nothing is wrong with rifle. I have seen plenty of hornady cases get stuck even with factory stuff. 250gr and 285gr. Good luck