savage target action done by sss with their trigger, I believe it’s the pr&t hammerhead benchrest stock. The screw spacing is 4.4 aftermarket lug and nut.
Barrel specs from x caliber.
Savage Pre-Fit
Barrel Steel: 416R Stainless Steel
Savage Barrel Length: 26" (No Half inch Threads)
Caliber & Twist Rate: (6.5mm) .264 1:8 Twist 6 Groove
Bolt Action Contour: 29 - Savage Big Bull 1.120 4 1.000
Savage Shank Size: Large
Rifle Chambers: 6.5 X 47 Lapua
Muzzle Options: 11 Degree Crown
Bolt Action Fluting: No Flute
Engraving: No Engraving
Finish: Polish
Aftermarket recoil lug and barrel nut, will include base and rings. Zero rounds on the barrel. $1300
Consolidating a majority of my rifle only reason forselling
Barrel specs from x caliber.
Savage Pre-Fit
Barrel Steel: 416R Stainless Steel
Savage Barrel Length: 26" (No Half inch Threads)
Caliber & Twist Rate: (6.5mm) .264 1:8 Twist 6 Groove
Bolt Action Contour: 29 - Savage Big Bull 1.120 4 1.000
Savage Shank Size: Large
Rifle Chambers: 6.5 X 47 Lapua
Muzzle Options: 11 Degree Crown
Bolt Action Fluting: No Flute
Engraving: No Engraving
Finish: Polish
Aftermarket recoil lug and barrel nut, will include base and rings. Zero rounds on the barrel. $1300
Consolidating a majority of my rifle only reason forselling