I've got a set of Badger Ordnance 34mm USMC SASR Scope Rings with 1.49" height on their way to me now. They'll be holding a Vortex Razor HD 1-10 that's going on my M82A1. I need something in the 1.49 to 1.55 inch range as the optic will be used with a LWTS-LR that I believe has a ~1.5" height to centerline. Due to the 27 MOA already built into the Barrett's rail, combined with the fact I won't be shooting past 800 yards, I'm looking for a 0 MOA mount.
Where I'm conflicted is that I'd somewhat prefer a QD mount in order to more easily use the LWTS-LR in stand alone mode when I desire to, but don't necessarily trust any of the QD designs, especially for this application. I have a 34mm Bobro, but I don't trust the single, screwed on lug for 50bmg and don't want to use it. What are the most solid QD mounts out there that fulfill my needs of 34mm and 1.5" height? Would a unimount be better than the BO rings I have on order for return to zero purposes, if I don't go QD? Any advice is welcomed and appreciated.
Where I'm conflicted is that I'd somewhat prefer a QD mount in order to more easily use the LWTS-LR in stand alone mode when I desire to, but don't necessarily trust any of the QD designs, especially for this application. I have a 34mm Bobro, but I don't trust the single, screwed on lug for 50bmg and don't want to use it. What are the most solid QD mounts out there that fulfill my needs of 34mm and 1.5" height? Would a unimount be better than the BO rings I have on order for return to zero purposes, if I don't go QD? Any advice is welcomed and appreciated.
Last edited:
