Accessories “The Original” Adjustable Retention Mag and Kestrel Holders

[DedicatedShooter]

Updated March ‘22

I am temporarily not making any holders right now.

I’ve got orders to Virginia and I’m in prep mode for the move. Please check back this fall after I have time to get settled in back east! Sorry for any inconvenience!

“The Original” Adjustable Retention Kydex Mag Holders for Short or Long Action AICS-pattern, V22, B14r, magazines, and Kestrels for sale!

Details:

- Carbon fiber in either OD, Black, or Coyote
- Adjustable retention device
- Flared opening
- SA holder fits ALL steel AICS-pattern mags, even AW mags (Now molded on an MDT mag)
- Long action version fits ANY length LA mag due to retention device adjustability
- Standard 1.5" belt clip OR DCL clip (adjustable to fit up to a 2" belt, push-button release with locking mechanism)
- Kestrel holders only offered in the “bottom up” orientation as shown in the pictures below. Offers better protection without the screen exposed, is more ergonomic as you don’t have to flip the Kestrel around in your hand when pulling out or replacing, also allows you to keep your lanyard attached!

Price (for short action):

- 1 w/ standard clip: $35 / 2 for $65
- 1 w/ DCL clip: $45 / 2 for $85

Price (for long action):
- 1 w/ standard clip: $40/ 2 for $75
- 1 w/ DCL clip: $50/ 2 for $95

Price for Kestrel Holder:
- Standard Clip only: $45

*Shipping included*
**I make these individually by hand in my spare time so please allow for a couple days' lead time to mold and ship

Payment via PayPal F&F, please PM me with your order details or if you have any questions!

 

[DedicatedShooter]

Friday morning bump

 

[DedicatedShooter]

Interested in checking out a RimX mag?

Absolutely! Send me a PM and we can discuss details. Thanks!

 

[Peter Laurvick]

Free bump for a great seller. You’ll get well taken care of

 

[ChiefSillyHorse]

These look awesome, may buy a few soon for my LE duty kit!

 

[DedicatedShooter]

These look awesome, may buy a few soon for my LE duty kit!

Chief, just let me know what you want when you’re ready and I’ll take care of ya! Thanks!

 

[DedicatedShooter]

TTT. Lots of pouches still available!

V22 and RimX pouches in the works too!

 

[DedicatedShooter]

Back up to the top with updates!

 

[Todc]

Will these work with mdt metal mags?

 

[DedicatedShooter]

Will these work with mdt metal mags?

Todc, PM’d!

 

[AnimalMother224]

message sent on two

 

[DedicatedShooter]

TTT! Long action holders now available!

 

[Peter Laurvick]

Tested the SA holder with Magpul AICS 5 round mags and even Rugers 5.56mm AICS Mags and good snug fit on both. Easy access when you need one. Actually hard to get off your belt afterwards so I know it won’t fall off running around or bumping it. Waiting to test out the 3.775” LA holders

 

[Jcrios014]

Bump for a great product!!

 

[Crews]

Buy with confidence, good product and great seller

 

[Todc]

These work great with MDT mags!

 

[DedicatedShooter]

Back up. Plenty of stock on hand for orders!

 

[AnimalMother224]

Got mine yesterday. Awesome pouches. Fast shipping and the seller is a top notch dude. Sent pics of the pouches when he finished building them. Solid dude for sure

 

[Lkeyes]

Mine showed up over the weekend and seller knocked it out of the park!! Awesome job on these LA mag holders!! Thank you sir!!
Great communication, detailed pics along the way, and fast service!! I have a feeling sir that you’re about to be very busy!!

 

[DedicatedShooter]

Back to the top. Still accepting orders for SA and LA AICS holders, MAGPUL AICS, and Vudoo V22 holders!

 

[DedicatedShooter]

Just finished this holder in carbon fiber tan for @Apnea , love this color! Plenty of carbon fiber and regular Kydex on hand for orders!

 

[DedicatedShooter]

Weekly Bump!

 

[wjwill]

tag for later this week

 

[Apnea]

Just received mine, it's awesome! Impeccable craftsmanship and perfect function.

 

[Apnea]

Do you make other ones, like pistol mags?

 

[DedicatedShooter]

Weekly bump. All orders from last week have been shipped and PMs replied to! Thanks again for the orders up to this point, nothing better than sending a good product to a fellow Hide member!

 

[DedicatedShooter]

Just finished these black carbon Kydex holders for @HR218 to go with his custom, one-off red Manners. Looks great!

 

[DedicatedShooter]

These two are on their way to @Bear9350!

 

[sch2046]

tag

 

[b6graham]

are the long actions CIP length?

 

[ChiefSillyHorse]

Still making these?

 

[DedicatedShooter]

Yea I am but haven’t renewed the post for awhile just due to a busy summer with my job and my shop being too hot since it’s not climate controlled. I also have a new design that offers more adjustability between AICS mag types (MDT, Accurate, AI, etc.). I haven’t had the chance to update the details and pictures yet.

 

[DedicatedShooter]

Just a preview.... I’m using a Magazine Retention Device (MRD) that has a set screw to enable you to adjust the amount of retention you require. They’re really, really slick.

For instance, for long action pouches, if you mold the mag holder with a CIP mag, the MRD offers the adjustability to allow that same holder to perfectly retain any shorter length long action magazine. It’s pretty nice.

Also doing Kestrel pouches now with the MRD in it too. I’ll see if I have time toupdate the thread overall this weekend.

 

[ChiefSillyHorse]

Nice PM sent

 

[Jadams]

Are you still making these? Need carbon version for Rim X.

 

[DedicatedShooter]

I plan to start making these again in the next few weeks, just need to get an order in for raw materials. Please watch the thread and I'll update it once I am up and running again! Thanks!

 

[Usmc03111983]

Also interested in one for a rimx mag

 

[cooper_257]

I will definitely take one for AICS when you have any

 

[Jabot]

PM sent

 

[DedicatedShooter]

Everyone,

Thanks for much for keeping an interest in these mag holders! Admittedly, I’ve been letting other stuff get in the way of starting back up with making holders again, so my apologies! Now that the heat is coming back here in AZ which will keep me off the range and away from chasing coyotes, I’ll have more time to start making holders again.

I’ve also had a bit of a hard time finding all the raw materials I need, specifically the hardware since that is all made overseas. I’m going to continue to do some more searching and when I get enough on hand to start taking orders, I’ll update this thread to let you all know!

- Nick

 

[Jabot]

Thank you, appreciate it

 

[Jabot]

I got a couple mag holders from dedicated shooter, these things r super nice. If anyone is interested in a great product, these r top notch

 

[goneballistic]

PM inbound, I'll take one for a Vudoo V22 Mag, OD green with the quick release belt clip

 

[mr.quick]

What size of belt clips are the size of the belt clips ,I need 1.75 or larger for my belt. Yes f they fit on my belt I will take 2 black ones . Let me know

 

[DedicatedShooter]

What size of belt clips are the size of the belt clips ,I need 1.75 or larger for my belt. Yes f they fit on my belt I will take 2 black ones . Let me know

standard clips fit a 1.5” belt. The DCL clip is adjustable to fit widths from paracord up to 2” belts. Please PM me if you’d like to talk options, thanks!

 

[hacabrera071]

Hey bud, I’d like to take a Kestrel pouch, black. From what I read above seems like you do them upside down, but one of the pictures shows the kestrel in the correct orientation, did I miss anything here? Please get me your PP info and I’ll get the cash on its way.

 

[Dwolkomir]

Got my Vudoo V22 mag holsters last week and they are great, they are flared nicely, no rough edges and mags slide in and out smoothly, the adjustable retention screw on the side works well for both Bergara B14r and Vudoo mags. I will definitely buy more of his products!

 

[DedicatedShooter]

Wednesday bump. Plenty of product on hand!

 

[DedicatedShooter]

I’m curious where they got this idea.....

Plenty of material on hand...own the original for less money and a better belt attachment



https://www.shortactionprecision.com/collections/mags-metal/products/sap-amc-adaptive-mag-carrier

 

[Krispybot]

Wednesday bump. Plenty of product on hand!

Are you making Rim X magazine holders at this time?