Found out about Randy through the FAL files. He goes by Sledeghammer. After several emails back and forth describing that I really wanted to turn my FAL into a lightweight, short 100 yard pig/ranch gun. I also did not want to lose any of the function of the FAL and the adjustability of the gas system. Randy and I decided on the following with my stock DSA FAL 21".
Cut barrel and perm install comp from Primary Weapon Systems. Adjust has system to compensate for shorter barrel. Go through gun to make sure everything was sound. I got it back and shot it the other day and I am 100% satisfied. Here is Randy's information.
Randy Kline
1855 FM 3288E
Jacksonville, Texas 75766
[email protected]
Here is what we ended up with and the loads/velocity I was using.
145gr armscor
IMR 3031 powder
Izzy mil brass
Win primers
37.5gr 38gr 38.5gr 39.0gr
2327 2497 2473 2532
2356 2400 2465 2466
2355 2548 2438 2506
2328 2503 2481 2529
2511
Best group was around 3.5"-4.0" with irons at 100y (mostly due to me and not the gun) Function was 100% and adjustment to gas produced even softer recoil. I had so much fun shooting it. The comp really helped out as you can see in the vids and pics below. Big shout out to Randy.
If you need FAL work done, Randy is awesome!!
LD
Cut barrel and perm install comp from Primary Weapon Systems. Adjust has system to compensate for shorter barrel. Go through gun to make sure everything was sound. I got it back and shot it the other day and I am 100% satisfied. Here is Randy's information.
Randy Kline
1855 FM 3288E
Jacksonville, Texas 75766
[email protected]
Here is what we ended up with and the loads/velocity I was using.
145gr armscor
IMR 3031 powder
Izzy mil brass
Win primers
37.5gr 38gr 38.5gr 39.0gr
2327 2497 2473 2532
2356 2400 2465 2466
2355 2548 2438 2506
2328 2503 2481 2529
2511
Best group was around 3.5"-4.0" with irons at 100y (mostly due to me and not the gun) Function was 100% and adjustment to gas produced even softer recoil. I had so much fun shooting it. The comp really helped out as you can see in the vids and pics below. Big shout out to Randy.
If you need FAL work done, Randy is awesome!!
LD