Selling my practically brand new 28 Nosler. Only 76 total rounds fired which included the barrel break in and initial load development with 2 different bullets (195gr Berger EOL and 180gr Hornady ELD-M). All work was done by the well-known gunsmith, Caleb Morris @ Alpha & Omega Rifle and Tool (chambering, muzzle threading, glass bedding, and timing trigger).
The only reason I am selling it is because I want to build a lightweight 7 SAUM or 7SS on a short action with short barrel that I can swap into my TL3 6CM MDT ACC chassis so I can try my luck at a ELR match next year.
Weight = 8.4lbs (Perfect balance of weight and recoil even without a muzzle brake)
Action:
Only trades I would be possibly interested in: Lightweight 7 SAUM / 7SS preferably on a TL3 SA, OR partial trade for Proof CF .284 18”, 20” or 22” OR TL3 SA w/ mag bolt face
The only reason I am selling it is because I want to build a lightweight 7 SAUM or 7SS on a short action with short barrel that I can swap into my TL3 6CM MDT ACC chassis so I can try my luck at a ELR match next year.
Weight = 8.4lbs (Perfect balance of weight and recoil even without a muzzle brake)
Action:
- Bighorn / Zermatt SR3 Long Action
- Medium Tang w/ Wyatt’s Extended Cut
- 20 MOA rail
- TriggerTech Special Curved (timed and set @ ~1.5lbs)
- Manners EH1 – Elite TAC Swamp Molded w/ 1” Recoil Pad
- Aluminum pillars and glass bedded
- Hawkins Oberndorf BDL and Wyatt’s Extended mag box
- Sling studs – 2 front and 1 rear
- Bartlein SS 5R cut rifling 3B contour
- Finished at 25.5”
- 1:8 twist
- Threaded muzzle 5/8x24 with blended thread protector
- Chambered specifically for 180-195gr bullets
- 28 Nosler Modified Case
- 50ct ADG brass (30 twice fired, 16 once fired, 4 virgin brass that I used as dummy rounds)
- Redding Type S Full Length Bushing Die (no bushings included)
- Forster Bench Rest Seating Die
Only trades I would be possibly interested in: Lightweight 7 SAUM / 7SS preferably on a TL3 SA, OR partial trade for Proof CF .284 18”, 20” or 22” OR TL3 SA w/ mag bolt face
