For sale is a build kit for a DARPA XM-3. Included is the following (Note - I’m only planning to sell this as a package):
- McMillan A1-3. I measured the placement of the inlet for the front rail and studs / swivels according to my XM-3 from the CMP, and had McMillan follow this (beleive it or not, I’ve seen these things installed / inlet way off on clones). I’ll provide a copy of my McMillan build sheet if you are interested in additional details.
- Hart barrel blank, cut and contoured to the XM-3 spec
- Remington stainless steel short action. The serial number starts with S65395##. It’s right in the sweet spot for a serial number, and less than 60 off from an XM-3 that recently sold on CMP.
- Surefire flash hider
- Turner saddlery sling
- Badger M4 bottom metal
- Magazine box and follower (lost the spring, but they’re easy to find)
- Badger tactical bolt knob
- Badger scope rail (1005-306-06 UX). The XM-3’s used a titanium rail that was “cloned” off of this badger rail, so it’s close but finding a titanium IBA rail is near impossible
- Titanium recoil lug
- Front EFR. This is a clone of the actual rail (compared it to my XM-3 and it’s spot on), other than not being marked.
I also have a mil spec NF 3.5-15 and NF low rings that I’d consider parting with for an additional cost if you buy the kit (not willing to sell separate at this time).
$5,075 shipped via UPS to your FFL. Just an FYI - I’m planning to list this on GB as well (with a slight premium to cover those fees).
Give me a shout with any questions. Thanks.
- McMillan A1-3. I measured the placement of the inlet for the front rail and studs / swivels according to my XM-3 from the CMP, and had McMillan follow this (beleive it or not, I’ve seen these things installed / inlet way off on clones). I’ll provide a copy of my McMillan build sheet if you are interested in additional details.
- Hart barrel blank, cut and contoured to the XM-3 spec
- Remington stainless steel short action. The serial number starts with S65395##. It’s right in the sweet spot for a serial number, and less than 60 off from an XM-3 that recently sold on CMP.
- Surefire flash hider
- Turner saddlery sling
- Badger M4 bottom metal
- Magazine box and follower (lost the spring, but they’re easy to find)
- Badger tactical bolt knob
- Badger scope rail (1005-306-06 UX). The XM-3’s used a titanium rail that was “cloned” off of this badger rail, so it’s close but finding a titanium IBA rail is near impossible
- Titanium recoil lug
- Front EFR. This is a clone of the actual rail (compared it to my XM-3 and it’s spot on), other than not being marked.
I also have a mil spec NF 3.5-15 and NF low rings that I’d consider parting with for an additional cost if you buy the kit (not willing to sell separate at this time).
$5,075 shipped via UPS to your FFL. Just an FYI - I’m planning to list this on GB as well (with a slight premium to cover those fees).
Give me a shout with any questions. Thanks.
Attachments
-
FBC266BA-AF2A-434B-83AB-514B1015C9F6.jpeg667.6 KB · Views: 425
-
318376B0-342E-4A04-A40B-5C9C28E013D6.jpeg502.3 KB · Views: 462
-
191A343E-1E4F-47CE-AA0E-1B9B955A778A.jpeg542.9 KB · Views: 434
-
B021F028-9264-4C72-82C1-34C6F4A663F2.jpeg723.4 KB · Views: 364
-
F768F19B-06FC-4118-81E6-493980296AD4.jpeg457.2 KB · Views: 385
Last edited: