WHAT:
More details are below adjacent to the relevant picture. (note, if there are any little white spots in the pics, then they are just tiny pieces of foam from the JAE packaging but I think I cleaned them all off)
PRICE: $1,250 shipped and insured UPS Ground in the original JAE packaging. Not open to offers…this is priced to move and I’d just as soon keep it than lower the price.
HOW TO BUY:
1. A screaming good deal on an impeccable JAE Gen 2 Chassis, Rem 700 inlet, grey with gray/green and black furniture, side rails, 2” ARCA rail, and bag rider
2. Per Ellen of JAE, they cut changes in as they were designed and they did not group them into “generations” per se.
This chassis is the latest configuration that was produced with the weight reduced approx. ½ lbs. and with the Rev. B inner action cage and latest mag well adjustment hardware
3. Tons of accessories and parts (see below) that can be used or sold to reduce your cost of the chassis
More details are below adjacent to the relevant picture. (note, if there are any little white spots in the pics, then they are just tiny pieces of foam from the JAE packaging but I think I cleaned them all off)
PRICE: $1,250 shipped and insured UPS Ground in the original JAE packaging. Not open to offers…this is priced to move and I’d just as soon keep it than lower the price.
HOW TO BUY:
1. If you want to post “I’ll take it” that’s up to you but it’s an invitation to be scammed by someone using an account name similar to mine. My suggestion is to contact me by PM for any questions and to commit to buy. First PM that says “I’ll take it” gets it.
2. I will insist on an exchange of full contact information and a phone call between us. This is not negotiable and it is for your benefit as a buyer rather than mine.
3. The only electronic payment I accept is PayPal FF (no notes about guns, please). Alternatively, I will accept a check/money order but it must clear my bank before I will ship. That can take up to a week.
4. I am located in the Maryland if you want to do face-to-face.
DETAILS:1. General pics of the chassis. Note the ARCA rail, bag rider, grip palm shelf, and bit of pic rail on the side to hang an accessory like a Send It level or perhaps a two round quiver. This piece of pic can also be mounted in the corresponding spot on the right side.
2. Top view. See the Rev B marking on the action cage in pic below which makes this the most latest one that J Allen produced
3. Bottom view
4. How it will ship
5. Accessories/optional bit
NOTE: MDT has sold out of all OG JAE accessories. If you don’t want any of these bits, you can sell them and significantly reduce your cost for the chassis.
NOTE: I'm not sure of the utility of the small ARCA piece. But, it can be mounted to the bottom of the full length ARCA or be installed in the place of the full length one.
- It has a sling stud mounted to it that can be moved to the full length ARCA, etc.
- There also is a small piece of pic rail mounted to this small ARCA and it too can be taken off and installed on the full length ARCA
6. Optional Bonus - I have a modified grip made by MKM that make the grip more vertical and moves the front strap closer to the trigger. It comes with an assortment of thumb rests. It had a small crack in the front strap area that I expoxied and I have used this grip for a good while and its not noticeable when shooting and functions perfectly . It will not fit into the JAE box but for an additional $20 (bringing the total to $1,270 shipped) I will ship it to you in a USPS flat rate box.
Attachments
Last edited:
