Lightweight 6.5 PRC package.
Weighs 6lbs 14.2oz as pictured
Included:
Lone Peak Arms Fuzion XM action with magnum bolt face. Stainless with nitride bolt
WTO switchlug
XLR Element Magnesium 4.0 chassis w/ hunter DBM
- custom krptek cerakote (black, grey, and noveske bazooka green) done by Snowy Mountain Rifles
- XLR thumb rest
- carbon fiber grip
- carbon fiber buttstock with carbon bag rider, sling attachment, and foam cheek pad
- The chassis was also bedded
Proof Research Carbon Barrel
- 6.5 PRC
- 26 inch
- 7.5 twist
- 5/8x24 threads with protector
- Both ends bead blasted to match action
Triggertech Special trigger
2 MDT XM 10 rounds mags
303 pieces of once fired Lapua 6.5 PRC brass
- 77 pieces have been annealed, resized, trimmer, chamfered, debured, expanded, and primed with CCI BR-2's
-226 pieces have just been cleaned.
- I do mark my brass with a green sharpie. Some pieces still have a faded green line on the bottom (pictured). Usually comes off with another wash.
I built this to use in NRL hunter matches. Ended up putting together a 25 creedmoor first and going that route instead. Only rounds fired down the barrel are whatever Clayton at WTO put down it for test firing.
$4,850 shipped to your FFL.
I will also sell the brass separately if the buyer does not want the included brass.
Please reach out with any questions or for more photos.
No trades at this time please.
Weighs 6lbs 14.2oz as pictured
Included:
Lone Peak Arms Fuzion XM action with magnum bolt face. Stainless with nitride bolt
WTO switchlug
XLR Element Magnesium 4.0 chassis w/ hunter DBM
- custom krptek cerakote (black, grey, and noveske bazooka green) done by Snowy Mountain Rifles
- XLR thumb rest
- carbon fiber grip
- carbon fiber buttstock with carbon bag rider, sling attachment, and foam cheek pad
- The chassis was also bedded
Proof Research Carbon Barrel
- 6.5 PRC
- 26 inch
- 7.5 twist
- 5/8x24 threads with protector
- Both ends bead blasted to match action
Triggertech Special trigger
2 MDT XM 10 rounds mags
303 pieces of once fired Lapua 6.5 PRC brass
- 77 pieces have been annealed, resized, trimmer, chamfered, debured, expanded, and primed with CCI BR-2's
-226 pieces have just been cleaned.
- I do mark my brass with a green sharpie. Some pieces still have a faded green line on the bottom (pictured). Usually comes off with another wash.
I built this to use in NRL hunter matches. Ended up putting together a 25 creedmoor first and going that route instead. Only rounds fired down the barrel are whatever Clayton at WTO put down it for test firing.
$4,850 shipped to your FFL.
I will also sell the brass separately if the buyer does not want the included brass.
Please reach out with any questions or for more photos.
No trades at this time please.
Attachments
Last edited:
