224 Valkyrie Upper Build
From Craddock Precision (as shown on receipt):
Stainless Polished, 24" "+2" gas Rock Creek 0.875 diameter Barrel 1:6.7, threaded 5/8x24
6.8 matched Headspaced bolt from Craddock (attached to JP carrier)
0.875 SLR adjustable gas block
Brake: can't remember the name, got it off Brownells a few years ago. Dual-side port with 2 smaller "on top" ports.
I am the original purchaser
Has 171 rounds down tube. Prefers Hornady 88's over the FGMM 90's. (see target photo)
From JP Enterprises:
JP PSC-11 Side (dual) side-charge and rear charge upper, fits standard AR-15 size lower
JP Bolt carrier with original unfired 5.56/.223 bolt head
JP MKIII Signature XXL 17.25" Forend, covers the gas block with 1 1/2" to spare (black skid pad not included). Has M-Lok sling swivel mount and bottom rail for bipod.
Again, original owner, got it from Brownells back when they actually sold these separately
Three ASC 6.8 mags FDE (one not shown in photo).
I've got about $1,900 into the entire build
For complete Upper: $1499 shipped insured
Just barrel & components (barrel, has block and tube, matching bolt head): $575 shipped
Upper with new .223 bolt head on bcg and hand guard: $925 shipped
WILL TRADE TOWARDS an S & B 3-20, 4-16, or 5-25 with H59.
Check the target photo for accuracy, I know you were going to ask so I took it out yesterday to the range. Used Factory Hornady 88's. Red diamonds are 5/8" square). 7 shots on each diamond. First two impacts on left diamond were scope sighters (hadn't shot it in more than a year). Clicked down 1/8" then shot 5 more on that one. Clicked down another 1/8", then put 7 shots in the middle diamond. Finally, clicked down a final 1/8"and shot the right hand red diamond.
From Craddock Precision (as shown on receipt):
Stainless Polished, 24" "+2" gas Rock Creek 0.875 diameter Barrel 1:6.7, threaded 5/8x24
6.8 matched Headspaced bolt from Craddock (attached to JP carrier)
0.875 SLR adjustable gas block
Brake: can't remember the name, got it off Brownells a few years ago. Dual-side port with 2 smaller "on top" ports.
I am the original purchaser
Has 171 rounds down tube. Prefers Hornady 88's over the FGMM 90's. (see target photo)
From JP Enterprises:
JP PSC-11 Side (dual) side-charge and rear charge upper, fits standard AR-15 size lower
JP Bolt carrier with original unfired 5.56/.223 bolt head
JP MKIII Signature XXL 17.25" Forend, covers the gas block with 1 1/2" to spare (black skid pad not included). Has M-Lok sling swivel mount and bottom rail for bipod.
Again, original owner, got it from Brownells back when they actually sold these separately
Three ASC 6.8 mags FDE (one not shown in photo).
I've got about $1,900 into the entire build
For complete Upper: $1499 shipped insured
Just barrel & components (barrel, has block and tube, matching bolt head): $575 shipped
Upper with new .223 bolt head on bcg and hand guard: $925 shipped
WILL TRADE TOWARDS an S & B 3-20, 4-16, or 5-25 with H59.
Check the target photo for accuracy, I know you were going to ask so I took it out yesterday to the range. Used Factory Hornady 88's. Red diamonds are 5/8" square). 7 shots on each diamond. First two impacts on left diamond were scope sighters (hadn't shot it in more than a year). Clicked down 1/8" then shot 5 more on that one. Clicked down another 1/8", then put 7 shots in the middle diamond. Finally, clicked down a final 1/8"and shot the right hand red diamond.
Last edited:
