I have 454 pieces of lupua 6mm Creedmoor brass that has been turned into 22 Creedmoor brass. 308 pieces have been fires 3 times and 146 have been fired twice (these will come sized and primed with 205M).
Virgan 6mm creedmoor brass when necked down had a .256 neck diameter which is the same as the saami PTG 22 Creedmoor reamer neck. All the brass was sized down in a 22 Creed whidden die, then fired once with a mild load to get the donut ironed out. Brass was annealed in an AMP then neck turned on a 21st century lathe to a .0135 neck for a total loaded round neck of .252 for the saami reamer.
Price is shipped
Virgan 6mm creedmoor brass when necked down had a .256 neck diameter which is the same as the saami PTG 22 Creedmoor reamer neck. All the brass was sized down in a 22 Creed whidden die, then fired once with a mild load to get the donut ironed out. Brass was annealed in an AMP then neck turned on a 21st century lathe to a .0135 neck for a total loaded round neck of .252 for the saami reamer.
Price is shipped
Last edited:
