Barreled action with MPA chambered 308 win (black one) and a rechambered (don't know who did it or previous rounds) 6.5 creedmoor (chrome) both 26".308 is threaded 5/8x24 and 6.5 is 3/4x24. Both barrels shoot 0.5"-0.75" at 100yds. With 168 tmk and 145 mb. I'm not sure on contour but took some measurements and if they need clarified just ask.
308 win bbl
26" long
Breach dia. 1.250"
Taper starts around 3"
Goes down around 6" @ 1.110 then tapers to muzzle @.850"
6.5 creedmoor 26" OAL
Breach 1.192" taper starts @2.2" from shoulder down to .915" dia @4.7" from shoulder. 0.915 straight until 20" from shoulder where it steps up to 1" for 4.5" to muzzle end
I've put roughly 700 rounds through each barrel. Action is extremely smooth and comes with factory trigger hanger, 0.030 offset hanger and action wrench. Any questions just ask.
Any questions just let me know.
308 win bbl
26" long
Breach dia. 1.250"
Taper starts around 3"
Goes down around 6" @ 1.110 then tapers to muzzle @.850"
6.5 creedmoor 26" OAL
Breach 1.192" taper starts @2.2" from shoulder down to .915" dia @4.7" from shoulder. 0.915 straight until 20" from shoulder where it steps up to 1" for 4.5" to muzzle end
I've put roughly 700 rounds through each barrel. Action is extremely smooth and comes with factory trigger hanger, 0.030 offset hanger and action wrench. Any questions just ask.
Attachments
Last edited:
