Solid Bullet Recommendation 6.5 PRC

107driver

Private
Full Member
Minuteman
Aug 8, 2013
33
9
Portland, OR
Newcomer to rifle reloading here, just getting set up. I'm looking for a recommendation for solid bullet manufacturer to load up the 6.5 PRC with an eye towards use on elk and hoping to get heavier than the Hornady 143 ELD-X. Rifle is a Seekins Element, which allows for a COAL up to 3.14" but only has a 1:8 twist, so it seems like that eliminates a lot of the heavier bullets that require faster. I have heard great things about Hammer Bullets, but wondering what else folks are liking for accuracy and terminal ballistics. I have some H4831 and StaBall HD so far. Thank you!
 
I have had good accuracy with both the Hammers and Barnes TTSX (approx. 1/2 MOA @ 100y). I’m not totally sold on the Barnes from family experience, but observed results from the hammers are giving me confidence (observed others results).

Either way, I would measure the twist rate and try to match the “heavier” bullets per manufacturer’s recommendation.

There is a lot of good information on loading and selecting hammers on their forum.
 
  • Like
Reactions: 107driver
I’ve had good luck with PVA solids in the accuracy department. The 122 has a hollow tip and IIRC there are some pictures in the hunting section where they dropped elk out of a creed.
 
  • Like
Reactions: 107driver