Spuhr Ideal Chassis System.

[VargmatII]

There is something coming up on the 6th of September. I would guess that it is time to start saving up money, again.
Håkan has been seen using what I assume is a prototype or a full on production model when he took part of some shooting competitions lately.

I would guess that it will be available for R700, Tikka T3(x) , Sauer STR and possibly Sako TRG, maybe even Blaser as there are not alot of options for them, and there are a lot of Blaser users in Scandinavia. But that is my own hypothesis.

Spuhr on Instagram: "Keep an eye on the horizon for whats in the future holds #spuhr #sics"

357 likes, 8 comments - spuhr on June 1, 2021: "Keep an eye on the horizon for whats in the future holds #spuhr #sics".

www.instagram.com

Speculations?

 

[KZP]

Can you copy paste some pictures for those of us without Instagram?

 

[VargmatII]

Can you copy paste some pictures for those of us without Instagram?

I wish I could, I dont have instagram either, I thought the link took you directly to the picture?
Did you try to click it? It is just a teaser picture, no picture of the whole chassis has leaked (yet).

 

[KZP]

It's forcing me to use a login to continue.

 

[Hairball]

It’s just a pic of a guy using what looks like a lathe of some kind. Not even a hint of any chassis in the pic. He is wearing a shirt that has “SPUHR Ideal Chassis System” printed on it.

 

[phlegethon]

Can you copy paste some pictures for those of us without Instagram?

 

[CerebralDistortion]

Also this:


I'm quite excited... Not, maybe, because I'm going to buy one just yet. But it is always interesting to see what Håkan @Spuhr is up to.

 

[Hairball]

Well, if their scope mounts run in the 400-500 dollar range, I can only imagine what they will charge for a complete chassis.

 

[KZP]

Well, if their scope mounts run in the 400-500 dollar range, I can only imagine what they will charge for a complete chassis.

I'll guess starting price of $2,750 with a $3,500+ version that has all the extra bits.

 

[308pirate]

 

[phlegethon]

I hope it’s not just another clone of the ACC.

 

[Hairball]

They need to keep it down somewhat. If it starts pushing past 3500, many will most likely pass on it and spend a bit more and get an AIAT-X

 

[Adam B]

I hope it’s not just another clone of the ACC.

Everything is a copy of everything else with just minor changes

 

[ohiofarmer]

They need to keep it down somewhat. If it starts pushing past 3500, many will most likely pass on it and spend a bit more and get an AIAT-X

Where are you seeing that it’s a complete rifle? It looks to be just a chassis from what’s been posted.

 

[Winny94]

What features are still lacking from what is currently available?

I think we could see further development of the recoil lug engagement - I think Mega was one of the first to introduce a lock of sorts, ARC has one and im sure others.
Guessing the proliferation of new metals and/or the hybrid metal/wood/composite offerings will become more prevalent?
What else could we see in the near-ish future.

 

[b6graham]

Steel forends

Ergonomic thumb shelf like a manners/mcmillan with thumb more on top than on side

Integral spigot

Short and Long action interchangeability (JAE style)

Arcalok like the Xylo

 

[THEIS]

Hi,

Future of chassis.............MODULAR!!!

And not talking of this grip vs that grip type modular.

I am talking about "lead sled" forends to integral ARCA forends to fully encapsulating forends.

Sincerely,
Theis

 

[phlegethon]

Although it’s not really new since benchrest stocks have done this for a long time, wider foreends for stability on bags would be great. We’ve seen this with the MPA competition side rails and the stackable weights for the AT-X, but I’m not sure there’s any reason why we shouldn’t just have a three inch wide foreend for a comp chassis.

 

[Hairball]

Where are you seeing that it’s a complete rifle? It looks to be just a chassis from what’s been posted.

Not implying that the SPUHR is a complete rifle but if I can get a complete AI rifle for a bit more, I would pass on the SPUHR chassis.

 

[b6graham]

Although it’s not really new since benchrest stocks have done this for a long time, wider foreends for stability on bags would be great. We’ve seen this with the MPA competition side rails and the stackable weights for the AT-X, but I’m not sure there’s any reason why we shouldn’t just have a three inch wide foreend for a comp chassis.

Id agree.

The Foundation Centurion is a start but then add an arca and you're back to 1.5" in reality

Needs to be wider yet have enough room to fit the a419/RRS clamps inside the chassis. Id guess a 3" chassis can accommodate this and the need for gamer plates starts to go away

 

[phlegethon]

Id agree.

The Foundation Centurion is a start but then add an arca and you're back to 1.5" in reality

Needs to be wider yet have enough room to fit the a419/RRS clamps inside the chassis. Id guess a 3" chassis can accommodate this and the need for gamer plates starts to go away

Yeah, the Arca system isn’t really ideal for this kind of thing. You can make wings that come down on the side but then you’re limited to lever clamps because the knobs won’t fit. So then the market is limited.

 

[SauerPatchKid]

Yesterday's post pretty much confirmed it is indeed a chassis... hopefully FDE is a more common finish from the factory than the mounts .

Spuhr on Instagram: "#spuhr #sics #quality #stability #adjustability #modularity #dmgmori"

555 likes, 7 comments - spuhr on June 16, 2021: "#spuhr #sics #quality #stability #adjustability #modularity #dmgmori".

www.instagram.com

 

[srt-4_uk]

Waiting for "Cracked my Spuhr chassis" thread.

 

[Changed]

It will crack on the rear action screw. Poor design.

LOL

 

[357Max]

Another PR chassis......................yawn.

Let me know when something becomes of this.

Spuhr's Enclosed Receiver AR-10

Hakan Spuhr has been thinking about his new project off and on since 2012. Best known for his Spuhr mount and the in-line G3 stock, recently adopted by the Portuguese Navy and the Swedish Army and Home Guard, Spuhr has now unveiled the concept model for his latest project, his attempt to improve...

www.thefirearmblog.com

 

[VargmatII]

So when Spuhr who has a good following here and pretty much everywhere tease that they are releasing the "Spuhr Ideal Chassis System" on September the 6th, some people here dont acctually believe that there will be a chassis?

I know that half of you will sell what ever spare organs you have left to get one. Dont try to kid anyone about anything else!

 

[Winny94]

odd release date - strategically after NRAAM, so can we assume theyre not planning on having a finalized function example until sometime after?

 

[sheepdog697]

Oh man, i just told the wife i was "done".... HAHA

 

[D̷e̷v̷i̷l̷D̷o̷c̷A̷Z̷]

I’m conflicted. Does the chasiss make the gun choot better or is it the action, oh wait the barrel, no it’s the recoil lug, no it’s the scope, wait bullshit it’s the scope rings, no says Ammo man it’s the ammo, then monolithic booklets hit the scene.

meanwhile my $4 R770 shoots under an inch, literally puts food on the table.

but it’s America, land of the indebted, home of the woke. They will buy it.



Maybe he will build a better film camera you can all masturbate over.

 

[b6graham]

I’m conflicted. Does the chasiss make the gun choot better or is it the action, oh wait the barrel, no it’s the recoil lug, no it’s the scope, wait bullshit it’s the scope rings, no says Ammo man it’s the ammo, then monolithic booklets hit the scene.

meanwhile my $4 R770 shoots under an inch, literally puts food on the table.

but it’s America, land of the indebted, home of the woke. They will buy it.



Maybe he will build a better film camera you can all masturbate over.

Go be poor somewhere else

 

[D̷e̷v̷i̷l̷D̷o̷c̷A̷Z̷]

Go be poor somewhere else

That’s so 2020 then new thing to do is post a picture of your bank account.

 

[MazPrecision]

Yeah, the Arca system isn’t really ideal for this kind of thing. You can make wings that come down on the side but then you’re limited to lever clamps because the knobs won’t fit. So then the market is limited.

I made a 3D printed version of exactly what you are talking about. It really helps get stable on props.

 

[Stoweit]

That stock is beautiful man, love those Foundation stocks.

 

[srt-4_uk]

I made a 3D printed version of exactly what you are talking about. It really helps get stable on props.

You just 3D printed a gamer plate. What he was talking about is more like the competition side rails that MPA sells. That way you widen the forearm but don't lose any arca real estate.

 

[phlegethon]

You just 3D printed a gamer plate. What he was talking about is more like the competition side rails that MPA sells. That way you widen the forearm but don't lose any arca real estate.

That's exactly right. I was talking about widening the actual forearm of the chassis, like the effect of the side rails:

But what you can see is that then you have problems with some Arca attachments. What would work better for a wide forearm would be something like the Anschutz rail system, but there's not the same level of support for that.

 

[MazPrecision]

But what you can see is that then you have problems with some Arca attachments

Thats the problem with an arca rail and a wide forend. You will have to increase the height of the arca rail to make clearance for arca accessories but then you lose the purpose of the wide forend for stability.

 

[Night Vision Viking]

Sorry I didn't see this thread until now.

It was released today. Press Release here: https://www.snipershide.com/shooting/threads/new-spuhr-ideal-chassis-system-sics.7091788/