Spuhr Mount Question

[Greymount]

I have an Accuracy International AT-X on order and I am wondering what Spuhr mount should I purchase for my Nightforce ATACR 7-35 scope. I intend to use the full bridge on the AT-X and the short picatinny rail on the front portion of the bridge. Should I purchase the Spuhr SP-4602 1.5 with the 20 MOA or should I get one with O MOA? Or should I go lower with a Spuhr mount that is 1.35?

 

[MarinePMI]

1.5 would be my suggestion. I'm running a ZCO 5-27, and it leaves about 1/4"-3/8" clearance with the full length bridge.

 

[Huskydriver]

I have an Accuracy International AT-X on order and I am wondering what Spuhr mount should I purchase for my Nightforce ATACR 7-35 scope. I intend to use the full bridge on the AT-X and the short picatinny rail on the front portion of the bridge. Should I purchase the Spuhr SP-4602 1.5 with the 20 MOA or should I get one with O MOA? Or should I go lower with a Spuhr mount that is 1.35?

Depends...are you getting the correct colinear action rail to be on plane with the NV rail?

@deersniper what mount were you getting away with the short action rail?

 

[MarinePMI]

1.5” Spuhr with the stock (low?) pic rail.

 

[deersniper]

Depends...are you getting the correct colinear action rail to be on plane with the NV rail?

@deersniper what mount were you getting away with the short action rail?

Running a 0 moa spuhr. I recommend the same if OP is running clip ons.
I’m just using a short section till AI gets the canted shorts in.
1.5 Spuhr lines up well with 1.3” centerline clip on. Using factory action rail.
Running 420x50 Zcomp with room to spare FYI

My lightly used full length rail is for sale at a steal price and arguably looks much better and is more functional.

I really need to have my gun shop buddy professionly cut that rail into thirds and sell 2/3 ^

 

[Greymount]

Thanks a lot. I will definitely go with the Spuhr 1.5 for my Nightforce scope. I will also go with the 0 MOA mount vs vs the 20 MOA. I don't see that much use with the 20 MOA. I currently have a MPA Hybrid Hunter in 6.5 with a 0 MOA MPA mount and it works fine. Now I have to decide if I want the shorter Spuhr mount or the longer length mount "B" for the AT-X. With the longer mount have have more scope movement for eye relief adjustment, but the negative is that it takes up more space on the rail. More decisions.