Gunsmithing Stiller Tac 30 LA bending AI mag feed lips.

[jugi16]

Hey guys I haven't called Stiller yet, but I probably will. Before I do has anyone ran into a situation where the AI mag feed lip was being folded over on the right hand side as viewed from the back on a Stiller Tac 30 action with fluted bolt? When the mag is empty and inserted it's fine. When you load rounds into the mag however it bends the lip over making the bolt almost lock up in the action when you try and feed a round into the chamber. The bottom metal being used in VBull Precision in a McMillian A5.

 

[slayer_21420]

I had the same problem with my tac 30 in a manners t3 w/mini chassis. All I needed to do is take a few thousandths off the magazine catch. Pretty common problem with the stillers and AI type magazines.

 

[jugi16]

Called Stiller. Moved the feed lips out at the front about 20 thou per side with a feed lip tool problem solved.

 

[trauma1]

Thx for follow up


Trauma1