• RIX Storm S3 Thermal Imaging Scope WINNER!

    Thank you to everyone who particpated!

    See the winner

Accessories STORM AN/PSQ-23A for sale

CoryT

Gunsite Rangemaster
Commercial Supporter
Full Member
Minuteman
  • Mar 5, 2004
    2,396
    1,805
    67
    Paulden, AZ
    www.gunsite.com
    Unit is complete except for the data/switch port caps. Tested to 9000m. Includes the APO quick release lever mount. $8500 delivered.

    The STORM contains 5 Lasers
    Visible Aim Laser
    Infrared Aim Laser
    Adjustable Infrared Illuminator
    Tactical Engagement Simulation (TESS/MILES) Laser
    Laser Range Finder LRF
    "Also" Digital Magnetic Compass DMC

    Laser Range Finder LRF
    Maximum Range - 10,000m
    Minimum Range - 20m
    Range Accuracy - +/- 1.5m
    Probability of Detection - 99%

    Aim Laser and Illuminator (Starlight Conditions)
    IR Illuminator Range High/Low - 2000m / 600m
    IR Pointing Range High/Low - 2000m / 600m
    Visible Pointing Range High/Low - >25m / >600m

    Unit Modes :
    VH
    : - Visible High - Used for aiming or marking in Daylight / Indoor conditions
    VL: - Visible Low - Used for boresighting
    O: - Off - The STORM aim and illuminator lasers will not operate
    AL: - Aim Low - The Low Power IR Aim Laser is useful for training and to engage close targets
    DL: Dual Low - The IR Aim Laser and Illuminator operate on low power to both engage targets and illuminate scenes using NVG's
    AH: - Aim High - The IR Aim Laser operates on high power to engage targets at distant ranges
    IH: - Illuminator High - The IR illuminator beam operate on high power to illuminate scenes at distant ranges
    DH: - Dual High - The IR Aim Laser and Illuminator operate on high power to both engage targets and illuminate scenes using NVG's
    SW: - Software Stryker RWS and other future systems

    IMG_5503.jpg
     
    • Like
    Reactions: amitune and Werk125
    You must be at least 18 years of age to use this site
    You confirm that you are at least 18 years of age by continuing to use the site.