Suggestions on tweaking magazine feed lips

One1Bravo

Ops4
Full Member
Minuteman
  • Jul 13, 2012
    1,559
    598
    35
    Baton Rouge, LA
    I have a match tomorrow and would like to run my Valkyrie. I'm trying to adjust the feed lips on my AICS mag with primal rights kit but seems like no matter how I adjust the nose of the follower stays up and only the rear slides down into the mag as pictured. Any suggestions?

    20190208_122001.jpg
     
    on the bottom of the follower, how is the spring attached?

    if it's not rivets, and is a screw - you can loosen the screw and move the spring forward/back depending which way the follow keeps tilting.

    so move the spring back toward the back of the magazine and it should put more pressure on the back of the follower.

    try that

    edit: it's a primal rights kit - so it should have the screw
     
    on the bottom of the follower, how is the spring attached?

    if it's not rivets, and is a screw - you can loosen the screw and move the spring forward/back depending which way the follow keeps tilting.

    so move the spring back toward the back of the magazine and it should put more pressure on the back of the follower.

    try that

    edit: it's a primal rights kit - so it should have the screw
    First method worked. Thanks, I'm new to this and wouldn't have ever even considered that.
     
    • Like
    Reactions: Olen_4504
    I've seen plenty of people fuck up the mag by screwing with the lips. I'll confess I've yet to jump on the Valk bandwagon, 308 mags the only option for that case?