Accessories TBAC Compatible Brakes - $85

[godofthunder]

EDIT: AS OF 8/8/24 THESE ARE RAW HEAT TREATED.

Finally have more of these in stock. This round is black nitride and not raw heat-treated. $85 each and I have both 1/2-28 and 5/8-24.

DM me here to purchase.

*Comparison picture next to TBAC courtesy of @MARLINLEVER

 

[ratrod54]

Which cans will this work with? I am assuming this is a CB break? Sorry for the question.

 

[godofthunder]

Which cans will this work with? I am assuming this is a CB break? Sorry for the question.

Yes, CB cans are what these are for.

 

[Sportin Wood]

Will using them void TBAC's warranty?

 

[godofthunder]

Will using them void TBAC's warranty?

No. I've talked with TBAC about it. Simply using aftermarket mounts will not void their warranty. It would only be void if the mount caused the damage. These mounts are 100% inspected so they should have no issue. I ALWAYS recommend checking alignment whenever a new muzzle device is installed though.

 

[godofthunder]

Free shipping for hide members!

 

[godofthunder]

$85

 

[godofthunder]

Bump $85 for Hide members.

 

[godofthunder]

$85

 

[SPK512]

I will take two 5/8-24 30 cal. Pm sent

 

[ifgator]

Are you planning anything for the 338 ultra sr?

 

[godofthunder]

Are you planning anything for the 338 ultra sr?

Not at the moment, maybe down the road.

 

[godofthunder]

$85 bump

 

[godofthunder]

bump

 

[samson7x]

Since these are 1 port, are they the same length as the TBAC ones or shorter? Would it be possible to make these in titanium if there is enough interest?

 

[godofthunder]

Since these are 1 port, are they the same length as the TBAC ones or shorter? Would it be possible to make these in titanium if there is enough interest?

They're almost the same length, maybe just a hair shorter. Ti would probably be doable if there was enough interest.

 

[blackblue]

Radial version that doesn't need timed would be nice.

 

[godofthunder]

Bump

 

[godofthunder]

Bump, have a bunch of the 30 cal and only 1 of the 223 left.

 

[Nivium]

Are you planning anything for the 338 ultra sr?

seconded

 

[Nivium]

They're almost the same length, maybe just a hair shorter. Ti would probably be doable if there was enough interest.

Also seconding the Ti

 

[godofthunder]

Bump.

 

[MARLINLEVER]

1.812” For the TBAC
1.500” For the Rusty Nuts

 

[godofthunder]

1.812” For the TBAC
1.500” For the Rusty Nuts

Thank you for the comparison picture!

 

[vagqman]

I'll take two of the 30 cal 5/8x24. They can be nitrided correct?

 

[godofthunder]

I'll take two of the 30 cal 5/8x24. They can be nitrided correct?

You could have them nitrided, yes.

 

[godofthunder]

Bump!

 

[godofthunder]

$85 bump.

 

[godofthunder]

Bump - only have ONE 1/2-28 version left.

 

[godofthunder]

Bump. Only have 5/8-24 versions left for now.

 

[AlphaThree]

ETA on more 1/2-28?

 

[TacT-MecH]

Bump. Only have 5/8-24 versions left for now.

Will you be doing a riun of more of both sizes?

 

[godofthunder]

Will you be doing a riun of more of both sizes?

ETA on more 1/2-28?

I will be doing a run on both sizes, probably within the next month or so. Deciding if I'm going to do this single chamber brake again though or something that doesn't need timed.

 

[TacT-MecH]

When ever you're ready I would like 2- 1/2x28 and 3- 5/8-24 please. Possibly more

 

[godofthunder]

When ever you're ready I would like 2- 1/2x28 and 3- 5/8-24 please. Possibly more

PM sent.

 

[pldawg]

flash hider in a 1/2x28? Or a simplistic version of a brake? I’m finding that I just don’t shoot my rifles without the suppressors attached so I am not interested in fancy brakes.

 

[godofthunder]

flash hider in a 1/2x28? Or a simplistic version of a brake? I’m finding that I just don’t shoot my rifles without the suppressors attached so I am not interested in fancy brakes.

Single chamber 1/2-28 brakes, currently all out of them though. Might do a run of comps or something that don’t need timed.

 

[godofthunder]

Bump

 

[godofthunder]

Bump. Have a few 5/8-24 left, then it will be a couple months until I'm restocked.

 

[M5NSX]

Have any in 18 X 1?

 

[godofthunder]

Have any in 18 X 1?

Nope.

 

[godofthunder]

Bump, still have like 5-6 of the 5/8-24. Will be getting more made but probably at least a month out.

 

[Nivium]

Bump, still have like 5-6 of the 5/8-24. Will be getting more made but probably at least a month out.

Still no SR?

 

[godofthunder]

Still no SR?

No. Don't know that I will make SR.

Still have some 5/8-24 left. Will be Sept. before I have more.

 

[godofthunder]

Finally have more of these in stock. This round is black nitride and not raw heat-treated. $85 each and I have both 1/2-28 and 5/8-24.

DM me here to purchase.

 

[PlinkIt]

Ever come up with a non timed version?

 

[Tricky Dickey]

How about Ti

 

[godofthunder]

Ever come up with a non timed version?

Have a design, just haven't had them made yet. Was waiting for these to finally come in. Will be working on getting the non timed version done next.

 

[godofthunder]

How about Ti

No Ti yet, will probably have Ti made with the untimed design.

 

[TV308]

I would def be interested in a non timed Ti brake!