You've seen it for sale before from Thesemperfidude and through all the trading and back and forth the two of seem to constantly be doing, I acquired it again. So much of me wants to drop this in a Cadex dual strike to have a twin to the Cheytac I had, but ultimately I should just sell this. She's touched a mile a couple times but will also stack shots at 100. I've got a load with H1000 and 300gr SMKs I can share with the buyer.
All details should be below:
Built by Pierce Engineering, Lansing, MI (same pierce that builds the actions)
- Stiller Tac-338
- Bartlein custom barrel. 1:9.4 twist, and I believe it's 1.350 straight taper to 1.250 at 32".
- Threaded with David Tubb 5-star brake. There's practically no felt recoil on this gun. I'm not 100% sure on the thread pitch to be honest.
- Cerakoted graphite black
- Jewell HVR trigger (can replace with a timney if preferred)
- KRG W3 fixed, gen 4 (whatever one was all aluminum still), CIP mag well. Includes spigot mount up front to help balance the weight by getting the bipod a bit farther forward
- Round count: sub 200
- Weight: 29lbs (she's a truck axle, but she's AWESOME to shoot)
Extras included:
- (2) CIPmags
- (1) Hard shell case (just a cheapo)
PRICE: $2,500 shipped (the shipping is going to be expensive but I'll cover it)
Extras available for purchase:
- drag bag
- once fired brass
- dies
- Prime ammo
TRADES:
- Xbox Series X (about as rare as primers right now)
- 2.5-10 style scope (vortex, NF, etc. Not too picky, may consider a 1-8 as well)
- High end mil/mil optics (FFP preferred)
- light weight R700 LA chassis with CIP bottom metal. MTU/Proof Sendero channel preferred but I have no problem opening it up. Looking for a sub 3lb stock/chassis
- light weight hunting optic in the 3-15 or 4-20ish range (Vortex LHT, Leupold VX5, etc)
- Warne skyline bipod (need a couple of these)
- 6 or 6.5 creed ammo
- 223 75-80gr projectiles
- AR match grade barrels 1:8 or faster twist in 5.56 or 223
- Magpul UBR or PRS stock
- Gieselle. TImney, or TT AR-15 triggers
All details should be below:
Built by Pierce Engineering, Lansing, MI (same pierce that builds the actions)
- Stiller Tac-338
- Bartlein custom barrel. 1:9.4 twist, and I believe it's 1.350 straight taper to 1.250 at 32".
- Threaded with David Tubb 5-star brake. There's practically no felt recoil on this gun. I'm not 100% sure on the thread pitch to be honest.
- Cerakoted graphite black
- Jewell HVR trigger (can replace with a timney if preferred)
- KRG W3 fixed, gen 4 (whatever one was all aluminum still), CIP mag well. Includes spigot mount up front to help balance the weight by getting the bipod a bit farther forward
- Round count: sub 200
- Weight: 29lbs (she's a truck axle, but she's AWESOME to shoot)
Extras included:
- (2) CIPmags
- (1) Hard shell case (just a cheapo)
PRICE: $2,500 shipped (the shipping is going to be expensive but I'll cover it)
Extras available for purchase:
- drag bag
- once fired brass
- dies
- Prime ammo
TRADES:
- Xbox Series X (about as rare as primers right now)
- 2.5-10 style scope (vortex, NF, etc. Not too picky, may consider a 1-8 as well)
- High end mil/mil optics (FFP preferred)
- light weight R700 LA chassis with CIP bottom metal. MTU/Proof Sendero channel preferred but I have no problem opening it up. Looking for a sub 3lb stock/chassis
- light weight hunting optic in the 3-15 or 4-20ish range (Vortex LHT, Leupold VX5, etc)
- Warne skyline bipod (need a couple of these)
- 6 or 6.5 creed ammo
- 223 75-80gr projectiles
- AR match grade barrels 1:8 or faster twist in 5.56 or 223
- Magpul UBR or PRS stock
- Gieselle. TImney, or TT AR-15 triggers
Last edited:
