Gunsmithing Threaded adapters 1/2X36 to 1/2X28...

[M.P.]

if I remember correctly, there is a member here who sells adapters. I'm looking for a ID threads of 1/2X36 and OD threads of 1/2X28 so I can use my Trident on my 9mm upper.

Let me know if you happen to know the member handle name. Thanks

 

[sinarms]

Re: Threaded adapters 1/2X36 to 1/2X28...

how can you have the same inside and outside diameter?

 

[300sniper]

Re: Threaded adapters 1/2X36 to 1/2X28...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sinarms</div><div class="ubbcode-body">how can you have the same inside and outside diameter? </div></div>

it would have to be an extension/adapter.

 

[sinarms]

Re: Threaded adapters 1/2X36 to 1/2X28...

i dont know if I would like how that would look. if it was kept really short it might look ok.

 

[shoepop]

Re: Threaded adapters 1/2X36 to 1/2X28...

Go here, bottom of site 'suppressor thread adapters'.
http://www.trosusa.com/

 

[flounderv2]

Re: Threaded adapters 1/2X36 to 1/2X28...

His name is Ken and his screename is ksville. I actually spoke with him a few days ago and he will be making 2 adapters for me.

Here is his post which I believe your looking for. If this is who you were looking for and want his number, shoot me a pm and I will send it to you.

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1035765&page=1

 

[TCA4570]

Re: Threaded adapters 1/2X36 to 1/2X28...

Many standard threads have been cut to fit without gauges.
How is this a standard?
Size over wires will always be tight.
Can you cut?
If so why do you need a smith?

Many can do some, none can do all.

(please fill out your profile)

TC

 

[Buckoman]

Re: Threaded adapters 1/2X36 to 1/2X28...

I second Mark McWillis at TROSUSA. Does really good work. I had him build me an adaptor and he's treaded barrels for me.