just got my tikka all put together. Specs are as follows:
Trued receiver and lapped locking lugs
Krieger 1-8 twist .236 bore 1.2" for 3.5" then straight taper down to .875", 25.5" chambered for 243, crown is a cross between 11*and recessed target
BO 1.4" unimount with 20moa
Bushnell elite 6-24x50 FFP mrad G2DMR ret
Standard XLR chassis
A few pics at the range today:
[img:left]
[/img]
[img:left]
[/img]
When I got to the range the temp was at 35* and falling. FV winds of 18-20 with gusts up to 45 mph. Leaves, sand , and debris sandblasting me. When I left temp was 22*. First groups were good, but called it after the 3rd group. Fired the last group with a pair of cotton roping gloves on and said enough.
[img:left]
[/img]
[img:left]
[/img]
3rd and last group
[img:left]http://
[/img]
Trued receiver and lapped locking lugs
Krieger 1-8 twist .236 bore 1.2" for 3.5" then straight taper down to .875", 25.5" chambered for 243, crown is a cross between 11*and recessed target
BO 1.4" unimount with 20moa
Bushnell elite 6-24x50 FFP mrad G2DMR ret
Standard XLR chassis
A few pics at the range today:
[img:left]
[img:left]
When I got to the range the temp was at 35* and falling. FV winds of 18-20 with gusts up to 45 mph. Leaves, sand , and debris sandblasting me. When I left temp was 22*. First groups were good, but called it after the 3rd group. Fired the last group with a pair of cotton roping gloves on and said enough.
[img:left]
[img:left]
3rd and last group
[img:left]http://