-
Having trouble using the site?
Contact support
Gunsmithing Tikka T3 Recoil lug
- Thread starter reddog
- Start date
Re: Tikka T3 Recoil lug
Assuming you are rebarreling and re-stocking the gun, you could simply install a typical remington style lug in front of the receiver and retain it there with the barrel.
Assuming you are rebarreling and re-stocking the gun, you could simply install a typical remington style lug in front of the receiver and retain it there with the barrel.
Re: Tikka T3 Recoil lug
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: racesnake</div><div class="ubbcode-body">The Remmy lug will not work because the Tikka threaded shank is 1/16" smaller in diameter. </div></div>
Since a gunsmith would be installing the lug, it would be no problem at all to cut the shoulder on the barrel to match the inside diameter of the lug.
In the case where the threads were larger, then the lug just gets opened up.
This is all "barrel fitting 101" stuff.
Trivial work to any real machiniist...
Check out this drawing:
http://700barrels.com/stuff/700dimensions.pdf
Note how I specify the inside of the lug diameter?
That is so that I can cut the proper diameter shank on the barrel to locate the lug.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: racesnake</div><div class="ubbcode-body">The Remmy lug will not work because the Tikka threaded shank is 1/16" smaller in diameter. </div></div>
Since a gunsmith would be installing the lug, it would be no problem at all to cut the shoulder on the barrel to match the inside diameter of the lug.
In the case where the threads were larger, then the lug just gets opened up.
This is all "barrel fitting 101" stuff.
Trivial work to any real machiniist...
Check out this drawing:
http://700barrels.com/stuff/700dimensions.pdf
Note how I specify the inside of the lug diameter?
That is so that I can cut the proper diameter shank on the barrel to locate the lug.
Re: Tikka T3 Recoil lug
I have one Tikka with the Remington lug and one with a custom lug made especially for the Tikka barrel shank. If you want to pin it to the action (the right way), you'll need a custom lug. Any real smith should be able to make you one from bar stock.
You won't be disappointed you did it right.
John
I have one Tikka with the Remington lug and one with a custom lug made especially for the Tikka barrel shank. If you want to pin it to the action (the right way), you'll need a custom lug. Any real smith should be able to make you one from bar stock.
You won't be disappointed you did it right.
John
