Tikka Tac A1 w/Spuhr/Razor mounting issue

[27198]

I have a Tikka Tac A1 and want to mount my Vortex Razor 34mm scope with a Spuhr 4601 mount. The scope hits the Pic rail. Would I be better off trying a 4602 or adding a Pic rail riser? By adding an extra rail for elevation am I introducing potential for movement/inconsistency? Who makes a quality riser rail?Thanks

 

[Sniperwannabee]

I have a Tikka Tac A1 and want to mount my Vortex Razor 34mm scope with a Spuhr 4601 mount. The scope hits the Pic rail. Would I be better off trying a 4602 or adding a Pic rail riser? By adding an extra rail for elevation am I introducing potential for movement/inconsistency? Who makes a quality riser rail?Thanks

You just need to return that mount and get a higher one. Call eurooptic and they will recommend the correct height. Next time put this question in the optics section so you get more responses

 

[Merle]

You'll need an AR height mount due to the handguard. I have the same rifle with a 1.57" high ARC M10 mount with 20 moa due to there being no moa built into the Tikka scope rail.

 

[Gee Kay]

i understand theres been a shortage of coins in america (reads raid the kids coin jar), use coins to get a rough height before ordering scope rings/mounts.

 

[USMC mustang]

I have a Tikka Tac A1 and want to mount my Vortex Razor 34mm scope with a Spuhr 4601 mount. The scope hits the Pic rail. Would I be better off trying a 4602 or adding a Pic rail riser? By adding an extra rail for elevation am I introducing potential for movement/inconsistency? Who makes a quality riser rail?Thanks

Forget the riser and get a SP-4602.

 

[Conaso]

USMC Mustang is correct. I have a SP-4602 on my Tikka Tac A1.

SP-4602
6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 121 mm/4.76”
Weight: 257 g/9.1 oz

 

[27198]

That's what I suspected. Thanks for the confirmation. I'll have to watch for a 4602 and sell the 4601.