• HideTV Updates Coming Monday

    HideTV will be down on Monday for updates. We'll let you all know as soon as it's back up and message @alexj-12 with any questions!

  • Win an RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!

    Join the contest Subscribe

Firearms TL3 SA w/ .478 & .535 bolt heads & action wrench $1000/shipped

chase723

Pew Pew Guy
Full Member
Minuteman
Mar 29, 2017
585
296
Final consolidation of things makes me sell my last switch barrel setup. TL3 SA DLC w/ .478” & .535” bolt heads (.308 and Magnum), 30 MOA base and action wrench. Has ~2000 rounds on it. Comes with trigger pins. Unbelievably smooth at this point. $1000/shipped. Open to reasonable offers. Do not want to separate bolt heads/action wrench. Want to sell as a package. Saves someone $600. No trades.

Scratches on the recoil lug are from when I bedded it into a stock and it got stuck. I was using a new compound and despite using plenty of release agent it adhered. I had to pass a small drill bit down the front to get it unlocked. I’ve bedded probably a dozen rifles and that was the first time that has ever happened…sucked but they are purely cosmetic. I’ve used it as a switch barrel forever and it’s never effected repeatability back to zero. Always within 0.1-0.2 mils. You could literally color them in with a sharpie.

I also relieved a little bit under the 30 MOA base in the front because one of the barrels I was using has a 1.35” diameter shank and it was making contact. Bighorn/Zermatt rails hang off the end a little bit vs being flush with the action body. Unless you’re looking at it from the bottom you can’t really even tell.
IMG_1239.jpeg


IMG_1238.jpeg


IMG_1234.jpeg


IMG_1237.jpeg


IMG_1235.jpeg
IMG_1236.jpeg