Torque specs on a Tikka T3x trigger?

[Erie660]

Can someone tell me the torque specs on my Tikka Superlite T3x trigger? I had to remove it to send the barrel in to get threaded and I want to make sure I reassemble it correctly. Thanks

 

[brix8984]

I’m not sure if you’re gonna get a good answer for this. I usually torque mine to 65 in lbs with some sort of thread locker then give them a little extra with an Allen wrench. If it comes loose it can and will cause your gun to inadvertently fire.

 

[tacoman69]

I use a paint pen on the thread and crank as hard as I can with an allenkey

 

[trob]

I’m not sure if you’re gonna get a good answer for this. I usually torque mine to 65 in lbs with some sort of thread locker then give them a little extra with an Allen wrench. If it comes loose it can and will cause your gun to inadvertently fire.

Yep. My answer is FARKIN TIGHT.
Dead trigger or inadvertently firing is not on my agenda. 65in/lbs probably sounds good. It’s a big screw

 

[4O6shootist]

Tight as shit with some finger nail polish or blue loctite on the threads.