I wouls like to know if you have used the final finish product and if you likes the performance of it . I was thinking on trying it but hesitant
Bill
Bill
Tubb's final finish ?? anyone use it ?
- Thread starter Mag 300
- Start date
Re: Tubb's final finish ?? anyone use it ?
I have used it on two rifles, both have factory barrels. One is a M-700 in 30-06 and the other is a M-70 in 270 WSM. Before using the system, the barrels were pretty rough. They now clean up like custom barrels. I used the 25 round method on the second barrel, 50 on the first. I believe they initially had a 50 round method but changed the process several years after it hit the market. I hand load all of my hunting ammo and accuracy is pretty good. Dont have any data to compare with factory rounds as far as accuracy before and after. The throat moved only .001-.002. I don't think I would use it on a custom barrel but on a rough factory barrel I would use it again.
Ed
I have used it on two rifles, both have factory barrels. One is a M-700 in 30-06 and the other is a M-70 in 270 WSM. Before using the system, the barrels were pretty rough. They now clean up like custom barrels. I used the 25 round method on the second barrel, 50 on the first. I believe they initially had a 50 round method but changed the process several years after it hit the market. I hand load all of my hunting ammo and accuracy is pretty good. Dont have any data to compare with factory rounds as far as accuracy before and after. The throat moved only .001-.002. I don't think I would use it on a custom barrel but on a rough factory barrel I would use it again.
Ed
Re: Tubb's final finish ?? anyone use it ?
ED
I bought the .22 kit here for $20.00
I was going to put 10 of each tru a S&W mdl 41 and 10 of each thru a Anschuts 54.18 .22 rifle.
They have 5 compiunds in this kit and suggest 20 rounds of each theu the pistol / rifle.
Thanks for the info I am going to try 10 of each compound for the rifle and the pistol.
Bill
ED
I bought the .22 kit here for $20.00
I was going to put 10 of each tru a S&W mdl 41 and 10 of each thru a Anschuts 54.18 .22 rifle.
They have 5 compiunds in this kit and suggest 20 rounds of each theu the pistol / rifle.
Thanks for the info I am going to try 10 of each compound for the rifle and the pistol.
Bill
Re: Tubb's final finish ?? anyone use it ?
http://www.snipercountry.com/InReviews/DavidTubbsFinalFinish.asp
Also use the TMS rounds every 300 rounds in my custom tubes. I wouldn't use FF in a custom tube though.
http://www.snipercountry.com/InReviews/DavidTubbsFinalFinish.asp
Also use the TMS rounds every 300 rounds in my custom tubes. I wouldn't use FF in a custom tube though.
Re: Tubb's final finish ?? anyone use it ?
Rob01
Thanks I will try 1/2 the recommended oin the Smith 41 and the Annie since there .22
these are not custom so I think there will be an improvement . good time to start up the Chrono and get some before and after readings for the hell of it .
Bill
Rob01
Thanks I will try 1/2 the recommended oin the Smith 41 and the Annie since there .22
these are not custom so I think there will be an improvement . good time to start up the Chrono and get some before and after readings for the hell of it .
Bill
Re: Tubb's final finish ?? anyone use it ?
used it in my stock rem barrel and it went from a bear to clean into a dream stuff work pretty good
used it in my stock rem barrel and it went from a bear to clean into a dream stuff work pretty good
Re: Tubb's final finish ?? anyone use it ?
I have used both the Final Finish and TMS bullets with good results.
Most recently i fired all but the roughest grit through my SOCOM-16 M1A which had a pretty rough barrel. Makes cleaning the bore much nicer.
I use the TMS bullets in my Krieger DMR barreled M1A, fire 2 every 200 rounds or so. I'd have to dig out my rifle log but that sounds right haha.
I have used both the Final Finish and TMS bullets with good results.
Most recently i fired all but the roughest grit through my SOCOM-16 M1A which had a pretty rough barrel. Makes cleaning the bore much nicer.
I use the TMS bullets in my Krieger DMR barreled M1A, fire 2 every 200 rounds or so. I'd have to dig out my rifle log but that sounds right haha.
Re: Tubb's final finish ?? anyone use it ?
Both FF and TMS do what they say they do. Ive used FF on all of my factory tubes with great results, and the same goes for the TMS on custom tubes. I use 3 TMS every 200-300 rounds on my custom tubes.
Both FF and TMS do what they say they do. Ive used FF on all of my factory tubes with great results, and the same goes for the TMS on custom tubes. I use 3 TMS every 200-300 rounds on my custom tubes.
Re: Tubb's final finish ?? anyone use it ?
In don't see a need for it in a custom barrel and would not use it in one.
I consider if almost mandatory for my factory barrels.
In my experience group size is cut pretty much in half and the barrel cleans up much easier.
Great ROI effect.
In don't see a need for it in a custom barrel and would not use it in one.
I consider if almost mandatory for my factory barrels.
In my experience group size is cut pretty much in half and the barrel cleans up much easier.
Great ROI effect.
Re: Tubb's final finish ?? anyone use it ?
In don't see a need for it in a custom barrel and would not use it in one.
I consider if almost mandatory for my factory barrels.
In my experience group size is cut pretty much in half and the barrel cleans up much easier.
Great ROI effect.
In don't see a need for it in a custom barrel and would not use it in one.
I consider if almost mandatory for my factory barrels.
In my experience group size is cut pretty much in half and the barrel cleans up much easier.
Great ROI effect.
Re: Tubb's final finish ?? anyone use it ?
In don't see a need for it in a custom barrel and would not use it in one.
I consider if almost mandatory for my factory barrels.
In my experience group size is cut pretty much in half and the barrel cleans up much easier.
Great ROI effect.
In don't see a need for it in a custom barrel and would not use it in one.
I consider if almost mandatory for my factory barrels.
In my experience group size is cut pretty much in half and the barrel cleans up much easier.
Great ROI effect.
Re: Tubb's final finish ?? anyone use it ?
I used it on a factory tubed Remington 700. It worked great. Gonna try some of the preloaded stuff on a couple of ARs that aren't shooting up to my liking next.
I used it on a factory tubed Remington 700. It worked great. Gonna try some of the preloaded stuff on a couple of ARs that aren't shooting up to my liking next.
