Selling a large portion of my Remington Defense collection, all prices include shipping, more pictures are available upon request:
The short action spray painted one was a chassis used by CAG and it came directly from a member of the unit. Chassis has been spray painted and shows signs of use. It will be fully assembled when shipped, chassis can be cerakoted at buyers choice (although I advise against this to preserve spray painted) $7500
The LVAW was AAC’s submission to CAG for their low visibility assault weapon solicitation. It is changed in 300blk with a direct thread suppressor. A very small number of these were made, 22 if I remember correctly, making it insanely rare, unfortunately SIG won the contract so they never made more of them. Suppressor and rifle are on F3. $25k
The tanodized long action R700 was a prototype done for Naval Special Warfare to replace the AI AICS chassis. It was chambered in 300WM and featured a Satern square fluted barrel and AAC Titan Brake. The optic on top is a Schmidt and Bender 5-25 PSR with markings in tact. The chassis is also unique as it was made to take AI mags. Only a very small number of these were made and tested by NSW, but they were too expensive so the replacement was scrapped unfortunately. Package also includes an AAC Titan Suppressor that is not pictured. $28k
The complete MSR is THE MSR from all of Remington defenses advertising in the early 2010’s. It is the complete system including scope, rings, suppressor, etc. it will also come with a letter of authenticity from the engineer who built and helped design the platform. The rifle was referred to as “Goldie” by some at Remdef due to the unique color of the chassis. This MSR was also one of the first MSR’s to be built and features some early prototype design elements that are no longer on the later models which makes it even more unique. Suppressor is on F3. $30k
The Surgeon CSR used by CAG. This one features a very rare carbon fiber handguard (only 5 were ever made), the rifle is serial number 69. It was owned by a Remdef sales team member and shows very little signs of use. It includes a geissele 0 MOA top rail, 16” .308 with AAC Titan Brake, and a 24” 6.5cm serial number matched barrel. Both barrels feature wrench flats to be quickly swapped as required. The chassis was designed with input from members of the unit to fit their requirements and the action was ahead of its time using an integrated recoil lug allowing barreled to be quickly swapped in the field. $40k
The Remington Defense ACR PDW is 1 of 18 semi automatic Remington marked ACR’s ever made. Every single part of this rifle is Remington defense (no bushmaster here), the 9” PDW barrel was made for the United States Secret Service along with the AAC proto-SD suppressor that was made specifically for use with the PDW. The lower is aluminum and compatible with any trigger group of your choosing, for SOT’s, this can be converted to a post sample. $25k
The Remington Defense CSASS Submission rifle is an all time favorite of mine. The rifle was submitted to the M110 CSASS trials to compete for the CSASS contract. The rifle features a fluted 16” .308 barrel (cut from the same blanks as M24’s) 2 position adjustable gas block, AAC SR-7L suppressor, full ambi lower receiver, and many other small performance enhancements. Suppressor is on F3. $25k
The short action spray painted one was a chassis used by CAG and it came directly from a member of the unit. Chassis has been spray painted and shows signs of use. It will be fully assembled when shipped, chassis can be cerakoted at buyers choice (although I advise against this to preserve spray painted) $7500
The LVAW was AAC’s submission to CAG for their low visibility assault weapon solicitation. It is changed in 300blk with a direct thread suppressor. A very small number of these were made, 22 if I remember correctly, making it insanely rare, unfortunately SIG won the contract so they never made more of them. Suppressor and rifle are on F3. $25k
The tanodized long action R700 was a prototype done for Naval Special Warfare to replace the AI AICS chassis. It was chambered in 300WM and featured a Satern square fluted barrel and AAC Titan Brake. The optic on top is a Schmidt and Bender 5-25 PSR with markings in tact. The chassis is also unique as it was made to take AI mags. Only a very small number of these were made and tested by NSW, but they were too expensive so the replacement was scrapped unfortunately. Package also includes an AAC Titan Suppressor that is not pictured. $28k
The complete MSR is THE MSR from all of Remington defenses advertising in the early 2010’s. It is the complete system including scope, rings, suppressor, etc. it will also come with a letter of authenticity from the engineer who built and helped design the platform. The rifle was referred to as “Goldie” by some at Remdef due to the unique color of the chassis. This MSR was also one of the first MSR’s to be built and features some early prototype design elements that are no longer on the later models which makes it even more unique. Suppressor is on F3. $30k
The Surgeon CSR used by CAG. This one features a very rare carbon fiber handguard (only 5 were ever made), the rifle is serial number 69. It was owned by a Remdef sales team member and shows very little signs of use. It includes a geissele 0 MOA top rail, 16” .308 with AAC Titan Brake, and a 24” 6.5cm serial number matched barrel. Both barrels feature wrench flats to be quickly swapped as required. The chassis was designed with input from members of the unit to fit their requirements and the action was ahead of its time using an integrated recoil lug allowing barreled to be quickly swapped in the field. $40k
The Remington Defense ACR PDW is 1 of 18 semi automatic Remington marked ACR’s ever made. Every single part of this rifle is Remington defense (no bushmaster here), the 9” PDW barrel was made for the United States Secret Service along with the AAC proto-SD suppressor that was made specifically for use with the PDW. The lower is aluminum and compatible with any trigger group of your choosing, for SOT’s, this can be converted to a post sample. $25k
The Remington Defense CSASS Submission rifle is an all time favorite of mine. The rifle was submitted to the M110 CSASS trials to compete for the CSASS contract. The rifle features a fluted 16” .308 barrel (cut from the same blanks as M24’s) 2 position adjustable gas block, AAC SR-7L suppressor, full ambi lower receiver, and many other small performance enhancements. Suppressor is on F3. $25k
.
