VERY happy with my gun!

[clayne_b]

Im very happy about the way this load, and my rifle is shooting.

Shot prone with a Harris Bipod laying in the weeds with a rear sand sock... Hope I shoot like this at PCPR in a week and a half!

Now before you bust my nuggets that these are not 5 shot groups remember reloading supplies are hard to come by and I have a match in 2 weeks.

3 At 100 Yards

3 At 100 Yards

3 At 510 Yards

3 At 510 Yards

And the Rifle

 

[ogonzalez13]

Damn fine shooting. Rifle looks great. What is the barrel contour? Looks thin.

 

[Onoko]

You should be haha. That's some nice shooting.

 

[Shoottothrill]

I can't believe all the show offs around here. Joking great shooting, great looking stick. Good luck at your comp.

 

[clayne_b]

Onoko
Factory SPS Varmint action and barrel

 

[clayne_b]

Factory action and barreled Remington 700 SPS varmint .308

Timney 510 Trigger

Mcrees Precision Stock

Black hawk rings and base

Vortex 5x15-44 Mil Mil (Tactical)

Vortex bubble level

DIY bolt Knob


Fed Brass

CCI 200 Primers

43.5 gr Varget

168 gr SMK

Length.. not sure, Made them long but they still fit in the mag

 

[Boltfluter]

That is some great shooting. Now go kick some ass at the shoot!

Paul

 

[TXBRASS]

Good looking rifle....give us detail on the "DIY bolt knob" please....

 

[thrusty]

See...no one busted on your nuggets. lol

 

[Jdaniel343]

NIce shooting and Damn nice rifle.

 

[clayne_b]

Good looking rifle....give us detail on the "DIY bolt knob" please....

I used steel putty, over the existing factory knob


http://www.camskill.co.uk/smsimg/14...iksteel_steel_reinforced_epoxy_putty-1489.jpg

step 1

step 2

so it would not mess up how it closed

step 3 - 4 -5

mix, apply, shape, sand and paint

 

[RodneyDowns]

As you can see from the pics, This is best done while drunk.

 

[RodneyDowns]

And just to bust your nuggets: heres a few pics of mine.

These groups were shot during load development my 1st time out with the gun and unfired Rem brass. Jim Bawden was spotting for me. I was annoyed the holes werent touching until he reiminded me I was shooting at 200 and not 100 yards.

Heres one at 1000 yards.

But hey Curtis, Yours arent bad.

Side note: the Rem brass only lasted 3 reloads before it got to the point where I couldnt open my bolt after firing it. Even after using a SM Base dies on it. I switched to Win 7mm-08 brass and have loaded it 8 times now with no problems at all.

 

[MuleyTime]

As you can see from the pics, This is best done while drunk.

LOL......and did anyone tell him those are only 3 shot groops!!! I have 1 shot groups that kick ass all over this!!

JK.......Nice shooting. Looks like someone is taking the next match very seriously!!!

 

[clayne_b]

Nuggets busted! That is some damn fine shooting....

But who beat you in the last match?

 

[clayne_b]

LOL......and did anyone tell him those are only 3 shot groops!!! I have 1 shot groups that kick ass all over this!!

JK.......Nice shooting. Looks like someone is taking the next match very seriously!!!

You and your 20BR... thats all I have to say about that...

 

[RodneyDowns]

You only beat me in the last .22LR match because you talked me into getting a CZ Scout like yours and it seized up on the 1st outing. Well see how it does when I get it back from CZ. AND now Im changing the COF to all weak side shooting and smiley faces!

 

[RodneyDowns]

Um yea, Muley. Im betting you meant 1 hole 5 shot groups with that 20BR of yours.

 

[Biggerhammer50]

Great shooting. Lets see what you do at tha PCPR.

"ΜΟΛΩΝ ΛΑΒΕ"

 

[clayne_b]

We shall see.

 

[Biggerhammer50]

Still haven't decided what I'm going to shoot yet. My Grendel or SASS suppressed

"ΜΟΛΩΝ ΛΑΒΕ"