VISION CHASIS / ELITE VERTICAL GRIP ?

[scorpio 25]

Hello for those of you running a MDT elite vertical grip on your VISION CHASIS what grip mount screw are you using the one that comes with the grip is too big and the original screw that comes with the vision bottoms out before you can tighten the grip mount to the chasis.What screw are you guys using?

 

[Baron23]

@GBMaryland do you run this grip on your vision??

 

[GBMaryland]

I run whatever grip came with the chassis… never had a problem with that grip.

 

[scorpio 25]

@GBMaryland do you run this grip on your vision??

yes

 

[scorpio 25]

I run whatever grip came with the chassis… never had a problem with that grip.

i didnt like the grip it came with so i wanted to swap it out with the MDT

 

[redx]

I run an Ergo on mine

 

[desert_impact]

I run the MPA grip, but I’m sure that after a trip to ace hardware with the original grip screw you’ll be able to find a shorter screw with the same thread pitch

 

[Maciej]

Had an extra bolt from one of my AR builds, if you have a parts bin I’d just look through it and maybe you’ll get lucky. Or swap one from one of your ARs if you have one to get the right length.

 

[Baron23]

I run whatever grip came with the chassis… never had a problem with that grip.

Ah, apparently not.

 

[scorpio 25]

Had an extra bolt from one of my AR builds, if you have a parts bin I’d just look through it and maybe you’ll get lucky. Or swap one from one of your ARs if you have one to get the right length.

View attachment 8130877

hello i was able to get one at home depot it is a socket cap screw M6-1.0x18mm it worked great.Nice rig got the same color.swapped out the block for a folder and i am waiting on a new butt pad the stock one is way to hard.There coming out with a new softer one

 

[scorpio 25]

I run the MPA grip, but I’m sure that after a trip to ace hardware with the original grip screw you’ll be able to find a shorter screw with the same thread pitch

yes i finally did thanks