Gonna have to get another one with a proof barrel I guessI see the future owner of a V3/60 !
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Gonna have to get another one with a proof barrel I guessI see the future owner of a V3/60 !
I sure like that stock. Did you just order plain like no color?Second outing with the 360. The rifle is great fun.
Shot about 150 rounds with 2 different lots of SK Match and a single lot of CenterX at 50 and 100 yards. CenterX still ourperforms the SK, but not by a whole lot. SK around .23-.70 at 50 and 1.0 at 100. CenteX fewer flyers, .238-.323 at 50 and .70 at 100. SK SD about 9, ES 37. CenterX SD about 7, ES 21.
Sending off to Lapua test center next week.
(The baffles were too low to shoot at 200. Took me a few shots to figure out why nothing was hitting paper!)
View attachment 7631188
View attachment 7631189
I sure like that stock. Did you just order plain like no color?
I would highly recommend getting the Gray Ops external weights instead of the ARC ones. They are heavier, more ergonomic, and a little wider for better balance on bags.The V22 showed up while I was on vacation. I was able to get to me FFL/SOT and pick it up today. Then get it home to set it up. I have 2 internal weights in and still need my outside weights to balance. I have not sent any rounds down range yet.
V22 20” KUKRI in sniper Gray
40 MOA Rail
ARC XYLO Chassis
Burris XTR3 5.5-30/56 in ARC 1.1 34mm ringsView attachment 7632781View attachment 7632782View attachment 7632783
Nice setup with the ARC.I would highly recommend getting the Gray Ops external weights instead of the ARC ones. They are heavier, more ergonomic, and a little wider for better balance on bags.
View attachment 7632847
Which plate you runNice setup with the ARC.
Due to the 1 piece of equipment rule I never ran an attached plate to my rifle, but with the new NRL2021-2022 season rules opening up the equipment and Nationals not having any restrictions I just started running with the attached gray ops plate and it definitely is the way to go. It throws a good pound of weight right at the center where you want to balance and has a grippyness on the bags.
Are you in WA? You should come shoot our matches in Renton.
I have 1 set of the large & small Gray Ops weights. Are you using full internal weight kit?I would highly recommend getting the Gray Ops external weights instead of the ARC ones. They are heavier, more ergonomic, and a little wider for better balance on bags.
View attachment 7632847
I think I have both ARC a internal weights and then the two large external Gray Ops as seen above. I do have the plate too but rarely find it necessary.I have 1 set of the large & small Gray Ops weights. Are you using full internal weight kit?
I have the Gray Ops plate and AG bag as well with its associated brass weights.
Which plate you run
Gonna have to check it out this weekend!I have the grayops pro plate w/ the brass weights. First time using it this past weekend.
My new Clede just came in today, so ready to roll! I had a git-lite one, but wanted the standard fill.Gonna have to check it out this weekend!
Got my new Vudoo. I never seen an unboxing video of a vudoo 22 after searching. So I made one. First YouTube video I’ve ever done. Nothing great but at least you see how the gun comes to you with the custom vudoo case
keith
That is NOT the normal shipping case. Plano Basic is what it ships in.Sweet! Now, to be sure-that case is not the one a rifle usually ships in? My build is supposed to start this week I'm told.
So they do have the bore guides?
Yes, Vudoo sells bore guides. Just received mine last week.Sweet! Now, to be sure-that case is not the one a rifle usually ships in? My build is supposed to start this week I'm told.
So they do have the bore guides?
I ordered the case through them, I also ordered the bore guide. The case is awesome. The gun is remarkable. I ordered this gun without ever seeing one. I actually had my heart set on an Anshutz HB1810. Even went so far at to call Anshutz and have the guy pick me out a nice stock, he never called back……..THANK GOD! I then came across all the videos on YouTube. The results are stunning. The gun is so tight. So glad I went with Vudoo. I went to the range it was closed so I still need to shoot it. Also Mike Bush has been posting tips on Instagram. Gotta love the follow up these guys do.Sweet! Now, to be sure-that case is not the one a rifle usually ships in? My build is supposed to start this week I'm told.
So they do have the bore guides?
It allows. You have to press the bolt release to get it to slide in. Use the lower of the two holes on the left side of the bore guide (assuming you’re right handed)Speaking of this guide, I don't get the screws? I'm guessing Gen 3 = 360, but none of the 3 screw positions allow for full insertion. I had to remove the screw.
View attachment 7634701
From what I remember when mine came there was a pamphlet that explained the screw was only needed for a certain generation of action (1 I believe) and would not be used otherwise.Speaking of this guide, I don't get the screws? I'm guessing Gen 3 = 360, but none of the 3 screw positions allow for full insertion. I had to remove the screw.
View attachment 7634701
Put the mk5 back on and ditched the zco?Lots of cool stuff over the last two weeks in the mountains. I head home in another few days and anxious to dig into a few projects with my nine twist rifles. Don Jr. and I slayed a few gophers with the Three60 and it was awesome fun.
MB
Haven’t ditched the ZCO, it’s on my Accuracy International for a project I’m working on. The new ZCO for this rifle arrived after I left.Put the mk5 back on and ditched the zco?
That's too cool.Lots of cool stuff over the last two weeks in the mountains. I head home in another few days and anxious to dig into a few projects with my nine twist rifles. Don Jr. and I slayed a few gophers with the Three60 and it was awesome fun.
MB
This right here is what’s pushing my towards vudoo over the rimx right now as someone who is just starting to look into the new high end prs style repeater rimfires. I shoot a “schuetzen” style which is standing rest/offhand but it’s all single feed by tradition.If one were to single load a round by starting it into the chamber with fingers, the bolt will chamber the round and close just fine (push feed).
MB
Vudoo also has a Single Shot Follower for the repeaters...This right here is what’s pushing my towards vudoo over the rimx right now as someone who is just starting to look into the new high end prs style repeater rimfires. I shoot a “schuetzen” style which is standing rest/offhand but it’s all single feed by tradition.
I want to finger bang one again first the Friday before a match but I’m glad I was finally able to find confirmation that it works one at a time.
Unfortunately, only compatible with the Gen 1 and Gen 2 (SN# 3400 and below).Vudoo also has a Single Shot Follower for the repeaters...
https://vudoogunworks.com/product/single-shot-follower-insert-aluminum/
4Certain
Ugg. Bummer.Unfortunately, only compatible with the Gen 1 and Gen 2 (SN# 3400 and below).
Actually, I was thinking about picking up one of the MK Machining V-22 Safety Mags and modifying the top to create a single load sled.Ugg. Bummer.
I wonder if you could talk to Mike Bush, get some JB Weld and/or a file and figure out how to make it work...
Or purchase one of the Solid Plastic 'Safe Mags' and modify the top to work like a Shooting Tray...
Just looking for a way to try... My old WW II Pilot and Korea veteran dad used to say, "Where there is a will, there is a way"... He Certainly always made us try something as kids... It may not work. But try, try and try again... 4Certain
Cool! Very interested in seeing how it turns out for you.Actually, I was thinking about picking up one of the MK Machining V-22 Safety Mags and modifying the top to create a single load sled.
My sons are doing quite a bit of the 3-D printing. Way above my pay grade. But if you had a friend with that skill, you may get him to print a mag with a big flat top you could file/machine out your shooting tray... Less $$ and not 'safety yellow'...Actually, I was thinking about picking up one of the MK Machining V-22 Safety Mags and modifying the top to create a single load sled.
GunfighterActually, I was thinking about picking up one of the MK Machining V-22 Safety Mags and modifying the top to create a single load sled.
Looking at these terrific mods and ideas made me pull out a plastic Vudoo mag and look at it.
Thanks CCollier. Even if you had to glue some thin short wings on the side of the mag, it certainly looks like it would work to me. All proper Geometry and Sitting Position would exist with the top of the mag...4Certain,
That sounds like it could work. To me the toughest part of using these single-shot adapters is getting the bullet positioned on top of the feed tray (it tends to be narrow). I've sense bought one of Vudoo's V22S and it is a much better answer if you shoot shot single-shot a lot.
Good luck and keep us posted.
I’m not sure how they work in all the different chassis setups. I found a small issue with my AX chassis after I modified the design to get it to work for @Krob95. I am printing a slightly changed version as I type this to see if I can correct the issue.
Thanks Shane. Appreciate the pics and videos that you sent previously. Just took delivery of my new Vudoo. Haven't decided if I want to sacrifice a mag yet and fit a single shot adapter, modify a safety mag into a single shot sled, or work with my buddy on a 3D print. With all that said, I could always go to the extreme and just drop a new order for a V22SGunfighter
I posted these pics before but thought I'd post them again. I took a magazine and cut the top down and JB welded a single-shot adapter to the top. It's plastic but I see no reason the metal one would not work just as well. You have to cut the ejector off the single-shot adapter because you are using the factory ejector in the gun, which is part of the reason I like it so much. I've been using them for a few years now and no issues whatsoever. Just plug and play!
Good luck, ShaneView attachment 7636190View attachment 7636191View attachment 7636192
It might work but I’d rather not sacrifice a working magazine. My 3D printed one works and costs less than a mag.Looking at these terrific mods and ideas made me pull out a plastic Vudoo mag and look at it.
It would seem if you just lightly filed off the inside of the feed lips, leaving all the vertical portion there, that you could create a mag that would not longer work as a normal mag, because the 'hold down' rails on each inside of the feed lips had been filed off. But it would seem that you could just drop a round in that from the top and it would sit at just the right place and just the right height and just the right angle...
Is this guess correct?? What do you think??
4Certain
Thank you for the insights. I'm on my second V-22 repeater with the first being a Gen 2 and now a 360 which I just picked up a few days ago and still getting setup. The Gen 2 was impressive right out of the gate and I have no doubts the 360 will be as well. A V-22S will join it at some point to continue learning a new shooting discipline and shoot the occasional RFBR or F-Class match. In the meantime, the new 360 will happily fit the need for all-around use.Gunfighter716 - From someone who's enjoyed owning & shooting three V-22 repeaters (all Gen 1s) for several years, and who then bought a V-22S, I can say that I don't regret buying the single shot V-22S, even if I don't manage to get away from the farm long enough to shoot a single 22RFBR or F-Class match with the crazy weather we're having this spring. It's been every enjoyable working with this rifle, and if I had it to do over again - knowing then what I know now - I'd most certainly still buy the V-22S action. This rifle was the first one I'd ever used a tuner on, and the results convinced me that I needed to try another Pro-X on my oldest V-22 repeater, one that I barreled with a Krieger sendero blank finished at 22". I haven't sat down at the bench with the V-22 repeater and tried to duplicate the 50yd groups that I've shot with the V-22S, but at 200yds on steel, the repeater impressed me, shooting a very good lot of SK Rifle Match. In fact, at the tuner setting I was using that afternoon, the SK out-shot a very good lot of Lapua Center-X at 200, which I've never seen happen before with these same two brands/lots of ammo. I'm going to assume for now that I just happened to find a good tune for the SK, and that the Lapua needs a different tune. Past chrono data for these same two lots of ammo showed the SK being about 20-25fps slower than the Lapua, so it's logical that they would each require a slightly different tuner setting. Only time will tell...and at the rate I'm going - still trying to get spring planting done, and fighting a losing battle with the weather in doing so - it may be late this summer before I'm able to to figure this all out.
That is so freaking cool. What I wouldn't give to spend an hour shooting with either of you. That's so AwesomeLots of cool stuff over the last two weeks in the mountains. I head home in another few days and anxious to dig into a few projects with my nine twist rifles. Don Jr. and I slayed a few gophers with the Three60 and it was awesome fun.
MB