Rifle Scopes What mounts / rings for a Mark 5 hd 7-35x56

[gunrunner2019]

Just ordered a leupold 177332 mark 5 hd 7-35x56 for my tremor. What are you guys that have this scope using for rings or one piece mounts?

I typically use seekins precision rings on all my rifles, and they do make 35mm rings. I'm not against using them, just don't want to sell myself short if a better option is out there.

 

[msstate56]

ARC M10 rings. “Medium” height. Marked 35mm-28
Clears 5-25 on a Proof Sendero with plenty to spare.

 

[Mr. F]

Sphur if you can swing it. Model 5001 is the regular height, 5002 is the 1.5" for flattops. Both are 0 moa


MPA makes nice a mount too. I ran it a few time when i still had my 7-35 MK5 without issues

 

[47guy]

Seeking precision 1.26”

 

[gunrunner2019]

Any one run and ivey mount? I do plan to stretch this thing to a mile and beyond at some point.

 

[ofelas]

Richard Near; most any height & cant you'd like.

 

[jarredsc]

Rather go for a 1 piece mount they seem to be more consistent when mounting when you compare them to 2 piece mounts because your rail can be slight off and it will have an effect on your mounting

 

[Vamike9]

Just ordered a leupold 177332 mark 5 hd 7-35x56 for my tremor. What are you guys that have this scope using for rings or one piece mounts?

I typically use seekins precision rings on all my rifles, and they do make 35mm rings. I'm not against using them, just don't want to sell myself short if a better option is out there.

Sphur are nice, and I own them, however Badger Ordnance and Leupold Mark 4 steel rings are my go to rings.
The Badger Ord and Leupold rings don't require lapping, and they hold exceptionally well.

I like Seekins and own some as well, however they are known for leaving scope ring marks when removed.
Ring marks may or may not bother you, but I don't like ring marks.
Many pros use Seekins with success though...
Yet, most rings these days will do the job, it's the small things which matter.

I have personally witnessed Badger Ordnance rings return to zero on a Badger base, not even a 1/2 moa shift, it was dead on, and that's why they are my favorite!

Good luck