Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I'm biased but a JP AR10 upper with the side charger is my favorite. It is much better but rifle becomes a tiny bit more bulky.
... charging handle conflict with a cheek riser
The CTR with a RISR is a great combo. I run it on my LMT with an ATACR.I use CTR stocks on my stoner rifles (both large frame and small frame) which can have a cheek riser added that slides back out of the way when charging. This is only necessarily for me when I'm using "rails on rails" to either get optics up higher or create a ONE PIECE rail to get day optics and clipons lined up better. I get the CTR stocks and cheek risers from LARUE. I think they made them for their 7.62 OBRs but sell them separately.
I use CTR stocks on my stoner rifles (both large frame and small frame) which can have a cheek riser added that slides back out of the way when charging. This is only necessarily for me when I'm using "rails on rails" to either get optics up higher or create a ONE PIECE rail to get day optics and clipons lined up better. I get the CTR stocks and cheek risers from LARUE. I think they made them for their 7.62 OBRs but sell them separately.
... The stock has to be fully extended to pull the charging handle back and the BCG just makes it past the catch but the wings on the POF tomohawk still hit ...
I think he was referring to the Magpul cheekriser and not the LaRue RISR. The Magpul one doesn’t reciprocate and requires the stock to be placed at a setting to where it won’t interfere.Hmmm ... I just put the riser on all three of my CTRs on all three of my stoner rifles ... and it functioned the same way on each. Oh, and I collapsed the stock all the way in before each test. Pull the charging handle to the rear and the riser "top" (spring loaded) slides back to allow the charging handle to be pulled all the way to the rear. Everything functioned correctly on all three rifles. Got mil-spec charger from parts box .. 52.64mm with calipers ... versus PRI gas buster 57.14 mm. So the PRIs are a little bit wider, but still function with the RISER.
I'm happy with the PRI's especially since they solved the "soot in eye when shooting stoner rifle with suppressor" problem I was having. Strangely, this doesn't seem to happen on the carbines (a.k.a. SBRs) with suppressors on them, so I've never replaced the chargers on them).
... I think he was referring to the Magpul cheekriser and not the LaRue RISR. The Magpul one doesn’t reciprocate and requires the stock to be placed at a setting to where it won’t interfere ..
I'm biased but a JP AR10 upper with the side charger is my favorite. It is much better but rifle becomes a tiny bit more bulky.
Rainier Avalanche.
Badger Ordnance.
in their industry forum on TOS, I asked them about that, the AR-15 avalanche just came in stock, and the reply was that the AR-10 version should be in-stock soon. I usually get a couple when they're available because, yeah, you're right, they're never in stock when you need one.Eying both of these and a Griffin Arms Snatch.
The avalanche is never in stock.
I use the CTR stock on one of my rifles, along with the Magpul cheek riser. I usually run the gun with the riser reversed (looks kinda stupid) on the CTR stock and then I have to use either pos. 5 or 6, which is comfortable to me, but if I was a runner/gunner and needed to have it in the 3 or 4 pos., I wouldn't be able to run the C/H if I had an issue. All my C/H's are Radian "Raptors". No malf. or bent one's yet. Mac
Ah !!!
Thanks for the clarification !!! (I wasn't aware of the different Magpul version)
BCM Gunfighter is great when on a budget.
The Armageddon Tactical GMS-10 EVO is best overall IMHO.
Yes!! I used to think the big latches were cool until I started carrying a gun with one at night.Anything that won't tear a hole in you when you have to carry it slung.
That Geissele hurts just looking at it....
The EVO is set to release this week. I’m interested in the GMS-15 EVO. Did you get to try one already?BCM Gunfighter is great when on a budget.
The Armageddon Tactical GMS-10 EVO is best overall IMHO.
I use the PRI gas buster, cause then if I put a suppressor on the gun I don't get "soot" in my eyeballs
Use on large and small frame (different versions)
PRI = Precision Reflex Inc (google for that)