Will a .900 straight taper work in a CZ 455 PT?

[bm11]

Just bought a CZ455 Precision Trainer and am ordering components for my build. I am ordering a Lilja barrel, will the .900 straight taper work in the manners T4 without additional barrel channel work, or do I need to order a Varmint taper?

Thanks,

-Bob

 

[justin amateur]

Re: Will a .900 straight taper work in a CZ 455 PT?

CZ 455 PT has a 0.866” diameter cylindrical barrel.
The lilja is a 0.900" cylindrical, 0.034" won't be a problem.
Worst case scenario, some 120 grit sandpaper on a dowel
will take down any high spots in the barrel inletting of the stock.

 

[bm11]

Re: Will a .900 straight taper work in a CZ 455 PT?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jaia</div><div class="ubbcode-body">CZ 455 PT has a 0.866” diameter cylindrical barrel.
The lilja is a 0.900" cylindrical, 0.034" won't be a problem.
Worst case scenario, some 120 grit sandpaper on a dowel
will take down any high spots in the barrel inletting of the stock. </div></div>Thank you sir!

 

[bm11]

Re: Will a .900 straight taper work in a CZ 455 PT?

Lilja in route!