This is not just a hypothetical question. I'm getting ready to leave the country for an overseas contracting job for a couple years and I'm trying to lead turn my next rifle decision.
I currently own and load for a .308 SPS-T that been upgraded extensively and is a hammer. I probably have 3500 rounds down the tube so far. Primary use for the new gun will be LR steel (1000+) and TAC matches/steel safaris. Will definitely threaded for a brake and can.
So since I can order the gun well before I get home - time is not an issue for a custom build. Also, to a degree budget is fairly unlimited (within reason). So I'm thinking I have three options:
1. Get the 700 action rebarreled with a custom tube and worked by someone like GAP, APA, etc
2. Have a custom rifle built from the ground up using whatever action is best (surgeon, badger, GAP, etc)
3. Buy a complete rifle off the shelf like an AW, etc.
I'm initially leaning towards option #2 in .260 and keeping my current .308 intact for a "beat around" gun. I'm not particularly partial to the AICS style rifles, but I'm open to trying them again.
So help me spec a rifle with the above mission tasks in mind. Pick the custom shop, components (action, barrel, etc), and caliber. If you don't mind, try to justify why you chose your route.
Thanks for your help.
I currently own and load for a .308 SPS-T that been upgraded extensively and is a hammer. I probably have 3500 rounds down the tube so far. Primary use for the new gun will be LR steel (1000+) and TAC matches/steel safaris. Will definitely threaded for a brake and can.
So since I can order the gun well before I get home - time is not an issue for a custom build. Also, to a degree budget is fairly unlimited (within reason). So I'm thinking I have three options:
1. Get the 700 action rebarreled with a custom tube and worked by someone like GAP, APA, etc
2. Have a custom rifle built from the ground up using whatever action is best (surgeon, badger, GAP, etc)
3. Buy a complete rifle off the shelf like an AW, etc.
I'm initially leaning towards option #2 in .260 and keeping my current .308 intact for a "beat around" gun. I'm not particularly partial to the AICS style rifles, but I'm open to trying them again.
So help me spec a rifle with the above mission tasks in mind. Pick the custom shop, components (action, barrel, etc), and caliber. If you don't mind, try to justify why you chose your route.
Thanks for your help.