Harrington & Richardson 654 Slick Side 14.7" Carbine - Black. One range trip, shot < 100 rounds, cleaned and put back into the safe. Post Vietnam 70's style 654 Slick Side carbine. Export Model. Lightweight, K.I.S.S., and old school cool. Use as a base for your clone builds, or simply run it as is. H&R marked M16A1 lower, with an H&R Slick Side upper. Uses all A1 Style Components.
Will include 4 unused 30 round H&R mags and 1 20 round H&R mag.
Caliber: 5.56 NATO
Barrel Length: 14.7” P/W to 16” OAL
Barrel Profile: Pencil
Barrel Steel: 4150 Chrome Moly Vanadium
Barrel Finish: Parkerized
Chrome Lining: Yes
Muzzle Thread Pattern: 1/2" x 28
Twist Rate: 1 in 7"
Barrel Extension: M4
Gas System Length: Carbine
Diameter at Gas Block: .625"
Gas Block Type: Rifle Height Front Sight Base
Muzzle Device: A2 -style
Receiver Material: Forged 7075-T6
Lower Receiver Type: M16A1
Upper Receiver Type: Slick Side w/o feed ramps
Handguard Type: Carbine, 7 hole, with heat shields
Bolt Material: Carpenter 158 Steel
Bolt Carrier Profile: Full Auto
Fire Control Group: Standard Mil-Spec Trigger Group
Grip: A1-style
Stock: CAR-style
Buffer Tube Length: Carbine, 6 Position
Buffer Tube Diameter: Mil-spec
Overall Length: 32 inches
Weight (as configured): 6 lbs
FTF Deal:
--> Price: $1100 FTF Pearland
Shipping:
--> Shipped Price: $1200 insured
I will be shipping as an individual. Your FFL must be willing to accept from an individual; FFL must provide me a copy of their FFL. I will ship 2-day via USPS with full insurance. I may ship the lower separate from the upper.
First "I'll take it" (by timestamp) followed up with an immediate IM/email.
I accept and prefer Venmo. I can accept Zelle and PayPal FF Only.
Will include 4 unused 30 round H&R mags and 1 20 round H&R mag.
Caliber: 5.56 NATO
Barrel Length: 14.7” P/W to 16” OAL
Barrel Profile: Pencil
Barrel Steel: 4150 Chrome Moly Vanadium
Barrel Finish: Parkerized
Chrome Lining: Yes
Muzzle Thread Pattern: 1/2" x 28
Twist Rate: 1 in 7"
Barrel Extension: M4
Gas System Length: Carbine
Diameter at Gas Block: .625"
Gas Block Type: Rifle Height Front Sight Base
Muzzle Device: A2 -style
Receiver Material: Forged 7075-T6
Lower Receiver Type: M16A1
Upper Receiver Type: Slick Side w/o feed ramps
Handguard Type: Carbine, 7 hole, with heat shields
Bolt Material: Carpenter 158 Steel
Bolt Carrier Profile: Full Auto
Fire Control Group: Standard Mil-Spec Trigger Group
Grip: A1-style
Stock: CAR-style
Buffer Tube Length: Carbine, 6 Position
Buffer Tube Diameter: Mil-spec
Overall Length: 32 inches
Weight (as configured): 6 lbs
FTF Deal:
--> Price: $1100 FTF Pearland
Shipping:
--> Shipped Price: $1200 insured
I will be shipping as an individual. Your FFL must be willing to accept from an individual; FFL must provide me a copy of their FFL. I will ship 2-day via USPS with full insurance. I may ship the lower separate from the upper.
First "I'll take it" (by timestamp) followed up with an immediate IM/email.
I accept and prefer Venmo. I can accept Zelle and PayPal FF Only.
Last edited:
