-
Having trouble using the site?
Contact support
Re: Wolf Primers
I've used SRM and LRM and gotten excellent results. I don't know that they are better than any other brand, but they don't seem to be worse either.
I've used SRM and LRM and gotten excellent results. I don't know that they are better than any other brand, but they don't seem to be worse either.
Re: Wolf Primers
I'am going to give them a try. I have some on order. I was just wondering what people thought of them. I talked with a few people and they said they are great.
I'am going to give them a try. I have some on order. I was just wondering what people thought of them. I talked with a few people and they said they are great.
Re: Wolf Primers
I have been using the Russian KVB-7 primers (made by the same Russian factory) for years in my 6.5x55 match loads. Good stuff.
Don
I have been using the Russian KVB-7 primers (made by the same Russian factory) for years in my 6.5x55 match loads. Good stuff.
Don
Re: Wolf Primers
Widener's is down to 40k of the Wolf LRM primers. They had 85k just two hours ago. Haven't seen them in stock anywhere else for a while.
Widener's is down to 40k of the Wolf LRM primers. They had 85k just two hours ago. Haven't seen them in stock anywhere else for a while.
Re: Wolf Primers
LR Wolf primers are bigger they are very hard to seat on newer brass you will need a very good priming tool (K&M, Sinclair, Hornady) I can tell you that the handles on the Lee will not hold up you must get these seated all the way or you will have inginition problems if you can overcome this they are great primers that will more than likely give you better results
LR Wolf primers are bigger they are very hard to seat on newer brass you will need a very good priming tool (K&M, Sinclair, Hornady) I can tell you that the handles on the Lee will not hold up you must get these seated all the way or you will have inginition problems if you can overcome this they are great primers that will more than likely give you better results
Re: Wolf Primers
I use a RCBS hand primer right now. I can get a better hand primer if needed. I form all my primer pockets. That should help some.
I use a RCBS hand primer right now. I can get a better hand primer if needed. I form all my primer pockets. That should help some.
Re: Wolf Primers
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dar</div><div class="ubbcode-body">Are they the same as the Wolf primers? </div></div>
Yep. Same primer, just packaged as Wolf now.
Don
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dar</div><div class="ubbcode-body">Are they the same as the Wolf primers? </div></div>
Yep. Same primer, just packaged as Wolf now.
Don
Re: Wolf Primers
I just ordered the last 7K Wolf LRM 5 minutes ago @ Widners. I started to order 12K this morning, but you snoze, you lose it seems.
FWIW the PMC/Wolf/Russian work very well for me on everything from 45/70 and 40/65 BPCR, 243, 308, 7mm SAUM, 300 SAUM, and 30-06.
I just ordered the last 7K Wolf LRM 5 minutes ago @ Widners. I started to order 12K this morning, but you snoze, you lose it seems.
FWIW the PMC/Wolf/Russian work very well for me on everything from 45/70 and 40/65 BPCR, 243, 308, 7mm SAUM, 300 SAUM, and 30-06.
Re: Wolf Primers
I thought those are for magum calibers. I look at the this morning. I have some on order. Should be coming real soon.
I thought those are for magum calibers. I look at the this morning. I have some on order. Should be coming real soon.
Re: Wolf Primers
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dar</div><div class="ubbcode-body">I thought those are for magum calibers. I look at the this morning. I have some on order. Should be coming real soon. </div></div>
Standard and magnum rifle primers have the same priming mix and amounts. The standard primer has a copper cup and the magnum primer has a brass cup. The magnum primer has a tougher cup. The small magnums were originally recommended for use in .223/556.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dar</div><div class="ubbcode-body">I thought those are for magum calibers. I look at the this morning. I have some on order. Should be coming real soon. </div></div>
Standard and magnum rifle primers have the same priming mix and amounts. The standard primer has a copper cup and the magnum primer has a brass cup. The magnum primer has a tougher cup. The small magnums were originally recommended for use in .223/556.
Re: Wolf Primers
My primer of choice. Be sure to make sure they seat well, or you may have some that don't go off. The thicker cups hold up to increased pressures better.
And FYI: http://www.davidtubb.com/tcom_images/dtac/6mmxc_writeup.html
My primer of choice. Be sure to make sure they seat well, or you may have some that don't go off. The thicker cups hold up to increased pressures better.
And FYI: http://www.davidtubb.com/tcom_images/dtac/6mmxc_writeup.html
Re: Wolf Primers
Well I should have bought up the wolf primers. But I wasn't sure of the differnce. I do have some on order. It hopefully won't be to long. I read the David Tubb article. He basicly said the same thing you did about primer seating.
Well I should have bought up the wolf primers. But I wasn't sure of the differnce. I do have some on order. It hopefully won't be to long. I read the David Tubb article. He basicly said the same thing you did about primer seating.
Re: Wolf Primers
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300LW</div><div class="ubbcode-body">Widener's is down to 40k of the Wolf LRM primers. They had 85k just two hours ago. Haven't seen them in stock anywhere else for a while.
</div></div>
And Powder Valley is completely cleaned out now, except for 209 Shotshell primers.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300LW</div><div class="ubbcode-body">Widener's is down to 40k of the Wolf LRM primers. They had 85k just two hours ago. Haven't seen them in stock anywhere else for a while.
</div></div>
And Powder Valley is completely cleaned out now, except for 209 Shotshell primers.
Re: Wolf Primers
Yeah that is a great article.
The primers are made at this factory in Russia:
http://www.flame.murom.ru/en/
I emailed the plant in Russia to make sure. I used to have some of the old KVB-7 Russian primers that are on that site, and they told me they are the same as the Wolf. I ordered a brick of 5000 Wolf, and the outer box had all of the address and production info identical to that website... I also got a letter from the plant director saying that they are marketed as Wolf in the US, maybe a bit over the top, but I wanted to make sure they were the same as the old KVB-7 primers.
I found it interesting that they are now producing eco-friendly (no heavy metals) primers. (http://www.flame.murom.ru/en/Htmls/primers_free.htm)
I don't know how you would get any of those. I think Wolf is just the regular kind.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=819561
is a similar thread.
Fyi - PV may or may not be reflecting current stock on their website. I ordered some even though they were "out of stock" on the website and they shipped them right out to me, after the processing delay (apx. 2 weeks).
Yeah that is a great article.
The primers are made at this factory in Russia:
http://www.flame.murom.ru/en/
I emailed the plant in Russia to make sure. I used to have some of the old KVB-7 Russian primers that are on that site, and they told me they are the same as the Wolf. I ordered a brick of 5000 Wolf, and the outer box had all of the address and production info identical to that website... I also got a letter from the plant director saying that they are marketed as Wolf in the US, maybe a bit over the top, but I wanted to make sure they were the same as the old KVB-7 primers.
I found it interesting that they are now producing eco-friendly (no heavy metals) primers. (http://www.flame.murom.ru/en/Htmls/primers_free.htm)
I don't know how you would get any of those. I think Wolf is just the regular kind.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=819561
is a similar thread.
Fyi - PV may or may not be reflecting current stock on their website. I ordered some even though they were "out of stock" on the website and they shipped them right out to me, after the processing delay (apx. 2 weeks).
