Working on a Client Design -- Opinions?
- Thread starter Veer_G
- Start date
True, but I chose the older "Victory" dime to demonstrate a purposeful eschewing of old, outdated gender biases.
Using Roosevelt might have shown that I'm mired in antiquated cisgendercentric modes of thought.
Damn, I just can't get this shit straight.
i dunno man.....i think using women as currency is a bit misogynistic and demeaning to womens value in society.......
Doesn't it need a hole in it? I mean, the goofus DOES say that he hits dimes at 1000....
Shouldn't it show a hit?
That said... Mercury dime is classic!
In God we Trust... Maybe "In Zuckerberg we trust" more fitting for little spawn?
Cheers,
Sirhr
Shouldn't it show a hit?
That said... Mercury dime is classic!
In God we Trust... Maybe "In Zuckerberg we trust" more fitting for little spawn?
Cheers,
Sirhr
Is that what that is? I thought it was a reflection.
Sorry, I'll go get a better prescription...
Or, if you want, I can take a dime down to the drill press tomorrow and send you a new image to work from.
Cheers and.... very nice... very nice!
Sirhr -- blind grandpa edition, that is.
Q
QuickNDirty
Guest
Don't worry old man, I'm about 1/4th your age and all I saw was what kind of looked like an indentation. There is no penetration. It needs penetration.
I take it this is a straight, no pun intended, posst.
It would help to know a bit about the client youre designing for to get a sense of what they might like...or not.
It would help to know a bit about the client youre designing for to get a sense of what they might like...or not.
Check out the "I love social media you can't make this up thread..."
It's a riot!
Cheers,
Sirhr
Hitting a dime at 1000 yds is weak sauce. 10th Group standard is putting the shot directly through the center of a washer at 1000 m.
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/images-na.ssl-images-amazon.com\/images\/I\/41s-JXt604L._SX342_.jpg"}[/IMG2]
Special Forces...All that shit you see in the movies...it's all true!
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/i.ebayimg.com\/images\/g\/Lc0AAOSwDN1UPs3l\/s-l300.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/images-na.ssl-images-amazon.com\/images\/I\/41s-JXt604L._SX342_.jpg"}[/IMG2]
Special Forces...All that shit you see in the movies...it's all true!
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/i.ebayimg.com\/images\/g\/Lc0AAOSwDN1UPs3l\/s-l300.jpg"}[/IMG2]
^^^^
Yeah yeah
[h=1]Large Washers with Outside Diameters up to 12"[/h]
Boker's extensive capabilities include extended washer sizes up to 12 inches in diameter. This is part of Boker’s wide offering, which provides washers and spacers to accommodate the largest range of applications across any industry.
Boker’s capabilities include flat washers and custom shapes such as tab and notched washers that are created to meet your exact specifications. Sizes range from 0.080-inch to 12-inch outside diameters and substantial inside diameter choices, providing endless washer possibilities.
Large washers are available in numerous metallic and non-metallic materials, thicknesses and production quantities that include prototype or production runs. Metallic options include low-carbon sheet steel, various spring steels, stainless steel, aluminum, brass, copper and nickel silver. Non-metallic materials include ABS, acetal, polyester, nylon, MD nylon, polycarbonate, fiber, polyethylene and various phenolics. Washer thicknesses can range from 0.005 to .134 inches. Production can be completed with fast turnaround times for prompt shipping.
Yeah yeah
[h=1]Large Washers with Outside Diameters up to 12"[/h]
Boker's extensive capabilities include extended washer sizes up to 12 inches in diameter. This is part of Boker’s wide offering, which provides washers and spacers to accommodate the largest range of applications across any industry.
Boker’s capabilities include flat washers and custom shapes such as tab and notched washers that are created to meet your exact specifications. Sizes range from 0.080-inch to 12-inch outside diameters and substantial inside diameter choices, providing endless washer possibilities.
Large washers are available in numerous metallic and non-metallic materials, thicknesses and production quantities that include prototype or production runs. Metallic options include low-carbon sheet steel, various spring steels, stainless steel, aluminum, brass, copper and nickel silver. Non-metallic materials include ABS, acetal, polyester, nylon, MD nylon, polycarbonate, fiber, polyethylene and various phenolics. Washer thicknesses can range from 0.005 to .134 inches. Production can be completed with fast turnaround times for prompt shipping.
^^^^
Yeah yeah
[h=1]Large Washers with Outside Diameters up to 12"[/h]
Boker's extensive capabilities include extended washer sizes up to 12 inches in diameter. This is part of Boker’s wide offering, which provides washers and spacers to accommodate the largest range of applications across any industry.
Boker’s capabilities include flat washers and custom shapes such as tab and notched washers that are created to meet your exact specifications. Sizes range from 0.080-inch to 12-inch outside diameters and substantial inside diameter choices, providing endless washer possibilities.
Large washers are available in numerous metallic and non-metallic materials, thicknesses and production quantities that include prototype or production runs. Metallic options include low-carbon sheet steel, various spring steels, stainless steel, aluminum, brass, copper and nickel silver. Non-metallic materials include ABS, acetal, polyester, nylon, MD nylon, polycarbonate, fiber, polyethylene and various phenolics. Washer thicknesses can range from 0.005 to .134 inches. Production can be completed with fast turnaround times for prompt shipping.
You see, this is the problem. I see "Boker," and I think that it's missing the umlaut, because "Böker" makes knives.
And I don't see AR-500 as a material choice.
Well, ok. Here ya go
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/media.giphy.com\/media\/gt2Iac63zSAwg\/giphy.gif"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/media.giphy.com\/media\/d6eI0ZdZNkYes\/giphy.gif"}[/IMG2]
Some of my finer work............
Similar threads
