Well, I'm getting out of some stuff that was intended for projects that never took off. Was planning on re-barreling one of my deviant's to 6BR but never got around to it so here is a good opportunity to pick up some quality parts at a good price. All prices are shipped...
-6BR Barrel
threaded and chambered for Defiance Deviant Action
X-Caliber 26"
Stainless Steel
M24 contour
1 in 7.5 twist
5/8" 24TPI threaded muzzle
$310.00 shipped
-Sold 300 pieces 6mm BR Lapua Brass (Fired 4 times)
80 are still loaded with hand-loads
110 Sierra Match King pills
29.8 Grains of Varget Powder
CCI 450 Primers
Lapua Brass
2795 FPS with the 26" Barrel
$210.00
-SOLD- 6.5 Grendel Barrel
Wilson Combat 20"
416 Stainless (cerakote)
Fluted
1 in 8 Twist
Rifle Length Gas System
5/8" 24TPI Muzzle hread
$280.00 shipped
260 Remington Barrel
Lilja .264 (6.5mm)
Chambered and shank threaded 1 1/16" 16TPI for standard Rem 700 action (not 10 over)
1 in 8 Twist
Stainless Steel
Chambered with PTG 260 Rem Match Reamer
300-350 rounds through it, Some factory Prime and some Hand loads.
5/8" 24TPI Threaded Muzzle cut to .250 OD for 2.5 inches to accommodate the Surefire Break (Not Included)
Cerakoted Black
$310.00 shipped
-Sold- .243 Winchester Accuracy International AT Barrel
Bartline 5R Stainless Steel
24" finished length 1 in 8 Twist
Cerakote Green
Low round count (300-400)
Muzzle threaded 5/8" 24TPI
$310.00 shipped
SOLD Knights Armament SR-25 Fore End
URX 3.1 including hardware and barrel nut.
$310.00
SOLD Lancer Carbon Fiber AR-15 Fore End
9.5" Length
All hardware and Barrel nut included
Full Length top rail
$175.00
Noveske Switch Block Regulated Gas System
Mid to rifle length I believe (need to do some more research)
Never installed just sitting in a drawer
$110.00
Sold US Optics ST-10 CB
Fixed 10x
44MM Objective
30MM Tube
Mil-Gap Illuminated Reticle
EREK 1/10th Mil Adjustments
US#1 1/10th Mil Windage Adjustments
$950.00
The only trades I would be looking for would be a noveske 300blk ar barrel or a couple surefire MB762SS AL/RE muzzle adaptors.
-6BR Barrel
threaded and chambered for Defiance Deviant Action
X-Caliber 26"
Stainless Steel
M24 contour
1 in 7.5 twist
5/8" 24TPI threaded muzzle
$310.00 shipped
-Sold 300 pieces 6mm BR Lapua Brass (Fired 4 times)
80 are still loaded with hand-loads
110 Sierra Match King pills
29.8 Grains of Varget Powder
CCI 450 Primers
Lapua Brass
2795 FPS with the 26" Barrel
$210.00
-SOLD- 6.5 Grendel Barrel
Wilson Combat 20"
416 Stainless (cerakote)
Fluted
1 in 8 Twist
Rifle Length Gas System
5/8" 24TPI Muzzle hread
$280.00 shipped
260 Remington Barrel
Lilja .264 (6.5mm)
Chambered and shank threaded 1 1/16" 16TPI for standard Rem 700 action (not 10 over)
1 in 8 Twist
Stainless Steel
Chambered with PTG 260 Rem Match Reamer
300-350 rounds through it, Some factory Prime and some Hand loads.
5/8" 24TPI Threaded Muzzle cut to .250 OD for 2.5 inches to accommodate the Surefire Break (Not Included)
Cerakoted Black
$310.00 shipped
-Sold- .243 Winchester Accuracy International AT Barrel
Bartline 5R Stainless Steel
24" finished length 1 in 8 Twist
Cerakote Green
Low round count (300-400)
Muzzle threaded 5/8" 24TPI
$310.00 shipped
SOLD Knights Armament SR-25 Fore End
URX 3.1 including hardware and barrel nut.
$310.00
SOLD Lancer Carbon Fiber AR-15 Fore End
9.5" Length
All hardware and Barrel nut included
Full Length top rail
$175.00
Noveske Switch Block Regulated Gas System
Mid to rifle length I believe (need to do some more research)
Never installed just sitting in a drawer
$110.00
Sold US Optics ST-10 CB
Fixed 10x
44MM Objective
30MM Tube
Mil-Gap Illuminated Reticle
EREK 1/10th Mil Adjustments
US#1 1/10th Mil Windage Adjustments
$950.00
The only trades I would be looking for would be a noveske 300blk ar barrel or a couple surefire MB762SS AL/RE muzzle adaptors.
Attachments
Last edited: