SOLD WTS Fully Loaded MDT ACC Premier or Trade for Matrix Pro

[KhaymKhaym]

Hey All!

I have an MDT ACC chassis with pretty much everything you can get. I have listed everything I have included with it and custom parts added to it. I also have added custom Gold accents to the chassis and have bedded it and tweaked everything that needed tweaking to make this thing run as well as it possibly can. This chassis has been absolutely excellent to me in the last couple of years I have run it and is built like a tank. However, I am moving onto the MPA crowd and my second PRS rifle and PRS rimfire rifle are both built on Matrix chassis, it just fits me better. So, I am wanting to trade my ACC for a Matrix Pro to keep everything uniform.

Notes on Chassis

• Bedded for an Impact 737R
• Does have some blemishes on the chassis from PRS match use and on the ARCA rail from mounting in a tripod for cleaning and moving my Cykepod up and down the ARCA rail.
• Customizations and parts added to the chassis are listed below

Parts List:

• MDT Baker Wings - $200
• MDT Elite Grip - $100
• MDT Premier Verticle Grip - $80
• MDT ACC Stock Grip
• MDT Internal Weights (5 Set) - $80
• MDT Mirage Shield - $150
• MDT Buttstock Jellies - $90
• MDT Rear Bag Rider (Steel) - $70
• MDT Rear Butt Stock Weight (Steel) - $70
• MDT Elite Cheek Piece - $60

Custom Parts:

• HK Machine Adjustable Thumb Rest - Required tapping 4-40 NC threads into the side of the chassis - $50
• HK Machine Trigger Bump - Required tapping 4-40 NC Threads into the side of the chassis - $40
• HK Machine Mirage Shield MLOK Block - $20
• HK Machine Baker Wing Extensions (Velcro removable attachment that makes the bottom of the baker wings flush with the bottom of the chassis) - $40
• HK Machine Skim Bedding Done - (Bedding is for an Impact 737R Short Action - Bedding consists of the rear tang area and the front action screw and recoil lug area, can be removed by sanding if desired.) - $200

Customizations to Chassis:

• Acrylic Gold Finish was added to the chassis for accent coloring, shown in the pictures. Can be removed with simple paint removers without harming cerakote if desired. This was added to the MDT Logos on the sides and top of the chassis as well as the top of the forend. Was also going to paint a stripe at the start of the buttstock but didn't get around to it, current coloring is gold foil tape that is easily removed if desired.
• Brass Thumb Screws Added to Buttstock (Still have original thumb screws and will include)
• Brass Screws Added for MDT Internal Weights (still have original screws and will include)
• Modified the front weight removal gate to allow perfect clearance for a 1.25 and 1.30 barrel, also modified the screws holding it in place so they fit flush with the contour of the weight gate.
• Mag Latch was modified to remove 15 thousandths of material from the top, this allows for an absolutely perfect fit with the Impact 737R's mag well with both Magpul, AccurateMag, AIX Mags, and MDT AICS magazines

EVEN THOUGH THE CHASSIS IS BEDDED FOR AN IMPACT 737 SINCE IT IS A REMMY 700 FOOT PRINT OTHER ACTIONS DO FIT. I PUT MY DEFIANCE RUCKUS ACTION IN THE CHASSIS AND TRIED FEEDING DUMMY ROUNDS IN THE VIDEO BELOW TO DEMONSTRATE THIS.



All in all this ACC has been a labor of love and has quite a lot of dinero dumped into it to make it as competitive as possible. To give a total number we are at $2550 when everything was shiny and new. I would consider offers to buy the chassis in the 1500$ range or OBO but my main goal here is to trade the chassis for a Matrix Pro that has a little bit of kit with it.

Price: $1450

 

[KhaymKhaym]

bump

 

[KhaymKhaym]

price drop 1450

 

[KhaymKhaym]

Video added of chassis running a Defiance Ruckus action with bedding done for an Impact. Rem 700 foot print is still Rem 700 foot print

 

[rpg777]

I’ll take this per our PMs

 

[KhaymKhaym]

SPF!

 

[KhaymKhaym]

SOLD! to rpg777