Selling my Gunwerks ClymR Ti 6.5 PRC rig --- incredible lightweight setup that is ready to go --- just decided I don't need this much gun for the conditions I hunt in...
Specs
Rifle: Titanium GLR Action; 22" Carbon barrel; Ti Radial Brake; GW Carbon Fiber Stock; LW rings
Scope: Leupold Mark 5 HD 3.6-18x44 with RH 1 MOA reticle non-Illuminated and custom calibrated turret for Hornady 143 ELD x on the scope (original turret and sunshade are included)
Total rig weighs 7lbs 15oz (scoped, no bipod)
Round Count: Original owner put fewer than 100 rounds through it. Second owner put 30 rounds through it. I put 20 rounds through it to ensure zero and calibration (spot on) --- had no problem holding 1/2 moa.
Will ship in the original cardboard box with foam cutouts for scoped rifle package.
Condition: Some minor handling marks on stock (see pics). There is a small abrasion in the outer carbon wrap of the barrel. It can be felt, but is tough to see/photo (see last two pics of barrel - best detail I could get). The original owner talked with Gunwerks, who did not believe it was any issue given the nature of it - they offered to have it sent in to repair with epoxy but the owner decided not to bother since the shooting was not affected at all and it is purely cosmetic.
$5880 shipped CONUS --- bipod not included
Specs
Rifle: Titanium GLR Action; 22" Carbon barrel; Ti Radial Brake; GW Carbon Fiber Stock; LW rings
Scope: Leupold Mark 5 HD 3.6-18x44 with RH 1 MOA reticle non-Illuminated and custom calibrated turret for Hornady 143 ELD x on the scope (original turret and sunshade are included)
Total rig weighs 7lbs 15oz (scoped, no bipod)
Round Count: Original owner put fewer than 100 rounds through it. Second owner put 30 rounds through it. I put 20 rounds through it to ensure zero and calibration (spot on) --- had no problem holding 1/2 moa.
Will ship in the original cardboard box with foam cutouts for scoped rifle package.
Condition: Some minor handling marks on stock (see pics). There is a small abrasion in the outer carbon wrap of the barrel. It can be felt, but is tough to see/photo (see last two pics of barrel - best detail I could get). The original owner talked with Gunwerks, who did not believe it was any issue given the nature of it - they offered to have it sent in to repair with epoxy but the owner decided not to bother since the shooting was not affected at all and it is purely cosmetic.
$5880 shipped CONUS --- bipod not included
Attachments
-
Gunwerks Clymr_1.jpg1.3 MB · Views: 186
-
Gunwerks Clymr_2.jpg840.6 KB · Views: 193
-
Gunwerks Clymr_3.jpg783.5 KB · Views: 133
-
Gunwerks Clymr_4.jpg951.5 KB · Views: 137
-
Gunwerks Clymr_5.jpg577.1 KB · Views: 139
-
Gunwerks Clymr_6.jpg1.4 MB · Views: 123
-
Gunwerks Clymr_7.jpg604 KB · Views: 118
-
Gunwerks Clymr_8.jpg721.5 KB · Views: 108
-
Gunwerks Clymr_9.jpg640.6 KB · Views: 118
-
Gunwerks barrel 1.jpg430.7 KB · Views: 92
-
Gunwerks barrel 2.jpg411.4 KB · Views: 139
Last edited: