6MM FatRat Complete Upper.
This complete upper was built by Lee Wells the man who invented the 6MM FatRat and was spared no expense.
Precision Firearms MOD 1 Upper Receiver. (Upper receiver was trued) $245.00
22" Bartlein 5R Barrel 1-8 Twist, Fluted, Rifle length Gas, 5/8x24 Threads, Enhanced Matched White Oak Barrel Extension, Chambered in 6MM FatRat Varmint, and Headspaced to JP Enhanced Bolt $700.00
SLR .875 AGB/Tube $120.00
PRI 12.5" GEN 3 Carbon Fiber Delta Handguard. $350.00
PRI SPR Gen III PEQ Top Rail Rifle Lgth. $153.00
PRI Rear BUIS $137.00
JP LMOS BCG $353.00
American Precision arms Gen 2 Little Bastard muzzle brake. $160.00
Over $2,200.00 in parts alone,
(Prices above do NOT reflect shipping or labor cost)
Exactly 215 rounds down the barrel, shoots .25-.5 MOA with 107 SMK Fire Forming Load, .5 MOA with 95gr TMK Load / 107 Standard Load.
SOLD
Included:
Complete 6MM FatRat Upper.
100 pcs Once Fired Lapua Brass
82rds New Fire Forming Loads with Lapua Brass.
Whidden Die Set with multiple bushings. $250.00
Load Data for 107 SMK Fire Forming Load, 107 SMK Standard Load, 95gr TMK Load.
The fire forming load pushes the 107 SMK .527 .BC at 2860 FPS without any signs of pressure, this upper has been meticulously cared for and is Like New. I have taken it out twice to 1,200 yards with effortless hits.
Also have (900) 95gr TMKs
(300) 107 SMKs, that can be included at extra cost.
I am flexible on the upper configuration if there are any parts that you do not want I can remove them or if you just want the Barrel and Bolt I can do that as well. (I WILL ONLY COMPLETELY PART IT OUT IF BARREL GOES FIRST) Obviously price will be adjusted as configured please PM me with any questions or offers, Thank you.
I am also open to trades preferably for Optics, but send me a PM of what you have to offer for trade, the worst that I can say is no thanks.
Jake
(Can also sell as a complete rifle if buyer is interested.)
This complete upper was built by Lee Wells the man who invented the 6MM FatRat and was spared no expense.
Precision Firearms MOD 1 Upper Receiver. (Upper receiver was trued) $245.00
22" Bartlein 5R Barrel 1-8 Twist, Fluted, Rifle length Gas, 5/8x24 Threads, Enhanced Matched White Oak Barrel Extension, Chambered in 6MM FatRat Varmint, and Headspaced to JP Enhanced Bolt $700.00
SLR .875 AGB/Tube $120.00
PRI 12.5" GEN 3 Carbon Fiber Delta Handguard. $350.00
PRI SPR Gen III PEQ Top Rail Rifle Lgth. $153.00
PRI Rear BUIS $137.00
JP LMOS BCG $353.00
American Precision arms Gen 2 Little Bastard muzzle brake. $160.00
Over $2,200.00 in parts alone,
(Prices above do NOT reflect shipping or labor cost)
Exactly 215 rounds down the barrel, shoots .25-.5 MOA with 107 SMK Fire Forming Load, .5 MOA with 95gr TMK Load / 107 Standard Load.
SOLD
Included:
Complete 6MM FatRat Upper.
100 pcs Once Fired Lapua Brass
82rds New Fire Forming Loads with Lapua Brass.
Whidden Die Set with multiple bushings. $250.00
Load Data for 107 SMK Fire Forming Load, 107 SMK Standard Load, 95gr TMK Load.
The fire forming load pushes the 107 SMK .527 .BC at 2860 FPS without any signs of pressure, this upper has been meticulously cared for and is Like New. I have taken it out twice to 1,200 yards with effortless hits.
Also have (900) 95gr TMKs
(300) 107 SMKs, that can be included at extra cost.
I am flexible on the upper configuration if there are any parts that you do not want I can remove them or if you just want the Barrel and Bolt I can do that as well. (I WILL ONLY COMPLETELY PART IT OUT IF BARREL GOES FIRST) Obviously price will be adjusted as configured please PM me with any questions or offers, Thank you.
I am also open to trades preferably for Optics, but send me a PM of what you have to offer for trade, the worst that I can say is no thanks.
Jake
(Can also sell as a complete rifle if buyer is interested.)
Last edited:
