SOLD WTS/WTT Tikka tac a1 6.5cm barreled action

LJT88

Supporter
Supporter
Full Member
Minuteman
  • Jul 16, 2019
    458
    91
    I have a factory tikka tac a1 6.5cm 24in barrel I’m looking to sell.

    Typical tikka rifle….smooth action and shoots great.

    Around 1000 rounds.

    Has a mountain tactical 20moa rail and factory 2 stage trigger with Yo Dave trigger spring.

    A couple cosmetic blemishes…..

    The factory chassis pic rail was a pain to get off. Long story short one of the rail screws broke off and I tried to drill it and get an eazy out in it and broke the eazy out and put a scratch on the action. You can see it in the pictures.

    I ended up sending the setup to LRI and they did their 8-40 hole treatment.

    Other blemish is on the barrel near the muzzle. I tried using CLR to clean my muzzle break and some CLR got on the barrel and reacted with the finish on the barrel. Also seen in the photos.

    Looking for $800 shipped to your FFL. FFL needs to accept from private party.

    Would possibly be interested in a trade for a long action magnum bolt face action.

    Thanks for looking.
     

    Attachments

    • 017E3C93-EFC9-4E5C-9AB0-C28EFEB0A758.jpeg
      017E3C93-EFC9-4E5C-9AB0-C28EFEB0A758.jpeg
      389.9 KB · Views: 130
    • 3974DBCB-1FDF-4948-9F89-248018C615F5.jpeg
      3974DBCB-1FDF-4948-9F89-248018C615F5.jpeg
      345.1 KB · Views: 124
    • 2ABCA9BF-ED85-4D27-AEE7-C4299BE35298.jpeg
      2ABCA9BF-ED85-4D27-AEE7-C4299BE35298.jpeg
      328.5 KB · Views: 141
    • 660BC4DF-00E2-40B1-A12D-A520D309E26E.jpeg
      660BC4DF-00E2-40B1-A12D-A520D309E26E.jpeg
      417.4 KB · Views: 147
    • F401ADF2-1022-4468-B9BC-4890877C27B6.jpeg
      F401ADF2-1022-4468-B9BC-4890877C27B6.jpeg
      315.2 KB · Views: 143
    • EF8DD5C9-7426-4EB0-A0DA-7E1F19478BCA.jpeg
      EF8DD5C9-7426-4EB0-A0DA-7E1F19478BCA.jpeg
      279.6 KB · Views: 133
    Last edited:
    Does it require bottom metal? I'm not familiar with these.
    Depends what sort of stock/chassis you want to put it in.

    A chassis from KRG / MDT / XLR isn’t going to need bottom metal.

    Now something from Manners / Greyboe / McMillan will need bottom metal unless you find a used one that already has it.