This ZC420 15 mil with the MPCT 1 reticle with locking turrets is like new with no signs of ring mounts. Glass is pristine. Unfortunately, the scope doesn’t fit with my Hawkins Heavy Tactical rings on my custom .28 Nosler action. So I’m selling this to get the ZC527 so I have more tube adjustment as my integrated pic rail action is very limited in terms of pic rail adjustments. Comes with original box, packaging, neoprene cover, battery cover tool, and a set of Aadmount caps. $3,200 shipped. Buyer pays for any requested insurance. Venmo or PayPal works.
-
Having trouble using the site?
Contact support
Optics WTS: ZC420 Zero Compromise 4-20x50 15mil MPCT-1 LCT - Like New
- Thread starter HighCountry77
- Start date
Alright, I was able to connect with Jeff Huber at ZCO as the Hawkins Heavy tactical rings wouldn’t work. Then ordered and tried the Hawkins new ultra light rings in 36mm but they only come in their medium height to which my bolt handle rubs. So, Jeff said I could order the ZCO rings at 1.18” so my bolt handle will clear and they are only a four screw so they should fit the tube length as well. Jeff said they are discontinued, but to try CS tactical to see if they still had a set in stock. They cost quite a bit more if you want the ring cap with the level, but it’s pretty much my only split ring option at this point. New rings shipped to me today and if they work I’ll take this listing down and hope that this post helps anyone else who was in my predicament. Thanks to the patient folks who have been interested in my scope while I tried to figure this out.
Good morning, thanks for checking in on the ZCO. I apologize as I need to update the post. My fourth attempt at getting rings worked and looks like I’m going to keep the scope at this point. Ended up with a set of ZCO’s discontinued rings that CS Tactical still had a set of. Not the cheapest route as you have to buy the bubble level top cap separately and they are heavier than the Hawkins, but size and height wise they’ll work. Best of luck out there.
Similar threads
