Zero Q

[army_eod]

Using Strelok for calculations. So here is my stupid question. Just need to confirm.

The ballistics are set for a 100 yd zero. Looking at the chart, of course there is a zero at 100 yards. There is also zero elevation at 50 yards. This is a 308.

Can I zero at 50 yards and expect it to be zeroed at 100?

I will confirm sometime on a longer range.

 

[m1match]

Short answer no... but you will probably be close which might be good enough for you. I plugged my 308 into Shooter and it says a 50 yd zero will be .5" low at 100 yds. Course if you zero at 50 yds, just plug that zero range into your Strelok and you're good to go.

 

[_Windrider_]

You can boresight at 25 This will get you close at 100 but you need to do an actual zero

 

[Rseawolf]

DONT KNOW HOW TO START MY OWN POST! Any help? Sorry for cutting in so here is my question?? New to forums so please bare with me. I have my 308 Zeroed at 50 yards. What would my Drop be at 200 yards? Shooting a Hornady Amr. Whitetail 150 gr.

 

[hlee]

@Rseawolf Here you go...

JBM - Calculations - Trajectory Card

www.jbmballistics.com